Single Fasteners

Filter
Locating bolt for sockets 1/4'' with sliding nut M4
003.4.083
Locating bolt for sockets 1⁄4" for slide nut M4 Dimensions: 6.3 - M4 mm Minimum purchase: 25 pieces

€3.57*

Net price: €3.00

Locating pin for sockets 1/4" bits
003.4.084
Mounting bolts for sockets and 1⁄4" bits on the K.Lean universal clamping rail. Fastening by means of a sliding nut in the rail. Dimensions: 10 x M4 mm Minimum purchase: 25 pieces

€3.69*

Net price: €3.10

Locating pin for sockets 3/8''
003.4.084-1
Locating bolt for sockets 3/8" for sliding nut M4 for fixing to the universal clamping rail. Fastening by means of sliding nut. Dimensions: 9.5 - M4 mm Minimum purchase: 25 pieces

€3.75*

Net price: €3.15

Step bolt for hanging up larger tools
003.5.158
Step bolt for hanging up larger tools with sliding nut M5. Dimensions: 12/8 x 32 mm M5 Minimum purchase: 25 pieces

€4.58*

Net price: €3.85

Locating pin for sockets 1/2''
003.4.085
Locating bolt for sockets 1/2" for sliding nut M4 for fixing to the universal clamping rail. Fastening by means of slide nut in the rail. Dimensions: 9.5 - M4 mm Minimum purchase: 25 pieces

€4.58*

Net price: €3.85

Equerre de fixation
003.4.553
Équerre pratique pour la fixation du rail de serrage universel K.Lean, qui permet d'élargir les possibilités de fixation des outils au poste de travail conformément aux directives 5S. Il suffit de visser l'équerre sur votre établi, votre chariot à outils ou votre mur 5S Shadow et de l'enfiler dans le rail de serrage universel K.Lean en aluminium à l'avant. Cela vous permet de fixer le rail de serrage en aluminium facilement et sans problème.

€6.66*

Net price: €5.60

Universal tool holder, non-magnetic
003.4.721
Verstellbereich: 0-10 mm
A tool holder whose clamping force can be perfectly adjusted was the wish of our customers. We have fulfilled this request and developed this intelligent tool holder. By means of the adjusting screws you can ideally adjust the width and pretension of the tool clamping range. This guarantees maximum efficiency and ergonomics. Available sizes (adjustment ranges): 0-10 mm 11-30 mm Currently only available on request.

€8.15*

Net price: €6.85

Holder for spray cans and bottles
003.4.393
max. Dosendurchmesser: 75 mm
Universally applicable holder for spray cans, bottles, plastic sleeves for cable ties etc. to the 5S workplace, the cleaning station or as an accessory to the workshop trolley. This tool holder is prepared for mounting on the K.Lean universal clamping rail. However, it can also be mounted on any wall, machine or workbench. The spray can is simply inserted from above. The lower plate of the holder carries the spray cans while the upper plate keeps the cans stable. This makes the can holder also suitable for vibrations and movements. The lower flange of the holder is provided with holes for screwing Ergonomic and fast access Made of 2 mm thick stainless steel sheet Opening dimension either D=75 mm or D=65 mm Quick access for spraying cleaning agents, spray cans with penetrating oil on the workshop trolley or the machine. Can be ideally combined with the K.Lean plastic sleeve (only with D=75 mm), e.g. to store cable ties. Plastic sleeve and spray can not included in the scope of delivery. Dimensions (only with D=75 mm):D= 65 mm (D x W x H): 79 x 85 x 125 mm D= 75 mm (D x W x H): 94 x 100 x 152 mm

Variants from €15.05*
€16.07*

Net price: €13.50

Phillips screw for universal clamping rail - length 12 mm
003.4.501
Gewinde: M4
Phillips screw for fastening the universal terminal strip at the front. Thread length: 12 mm Sold in packs of 100.

€16.18*

Net price: €13.60

Phillips screw for universal clamping rail - length 8 mm
003.4.500
Gewinde: M4
Phillips screw for fastening the universal terminal strip at the front. Sold in packs of 100.

€16.18*

Net price: €13.60

Set angle bracket
003.5.553
The angle bracket allows the universal clamping rail to be fixed to the wall for tool spacing and allows the rail to be positioned at the desired angle for ergonomic tool handling. The angle is infinitely adjustable. 2 pcs. angle bracket (003.4.553) 2 pcs. thread furrow- de screw M 6 x 16 (003.4.665) 4 oval head screw M 6 x 12 (003.4.515) 4 pcs. locking tooth nut M 6 (003.4.525) Material: stainless steel Distance from the middle of the rail to the wall: 24 mm Attention: The universal clamping rail is not included in this set! You can buy it in your desired length.

€16.42*

Net price: €13.80

Capuchon d'extrémité pour rail de serrage universel
003.4.161
Capuchon d'extrémité profilé pour éviter les blessures sur les extrémités de rails exposées et à arêtes vives. Taille 30x20x3 Prix par unité d'emballage de 20 pièces.  

€17.14*

Net price: €14.40

Pipe sleeve for cable ties
003.4.790
Höhe: 125 mm
Plastic sleeve with base e.g. for storing and providing cable ties, cans, bottles, tools, etc. With this practical plastic tube, in combination with our holder for spray cans, you can create a very individual solution for storing your tools and work equipment. Through the bottom nothing can leak, fall out or get away. Due to the different heights you can adapt your assembly trolley or workstation to your needs. Outside diameter = 75mm available sleeve heights: 125 mm / 200 mm / 250 mm Scope of delivery: Plastic sleeve with base - WITHOUT stainless steel holder.   ATTENTION: The holder (with D = 75 mm) must be ordered separately

€18.09*

Net price: €15.20

Tool holder for torque wrench
003.5.848
Professional holder, developed for variable tool use, fast and safe handling: Simply hook it in and touch the magnetic holder. Manufactured from stainless steel sheet. Dimensions HxDxW 65 x 60 x30 mm

€18.45*

Net price: €15.50

Adjustable bottle holder
003.4.133
Bottle holder to extend the mobile and stationary K.Lean stations. adjustable to cover different bottle diameters Ø76-Ø93 possible. Suitable for 1,5L PET bottle for cleaning agents, cleaning emulsions, etc. suitable for K.Lean Station 460 and 980

€19.75*

Net price: €16.60

Quiver holder D13
003.5.150
Screwdrivers and similar tools with a diameter of less than 13 mm are quickly and ergonomically accessible via the quiver holder.The holder is an alternative for tools without iron components, which do not stick to the magnetic universal tool holder.The quiver holder is fixed with a sliding nut and a knurled screw (included in the scope of delivery) is attached to the lower link of the universal clamping rail.

€21.90*

Net price: €18.40

Tool holder for 1.000 g hammer
003.5.846
Stable tool holder for 1,000 g hammer or mitten. Safely encloses the tool to prevent it from falling out.  The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Can also be mounted directly on a wall. Manufactured from indestructible stainless steel sheets. Dimensions: 174 x 90 x 30 mm

€22.37*

Net price: €18.80

Tool holder for mittens
003.5.843
The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Manufactured from indestructible stainless steel sheets. Dimensions: 174 x 90 x 30 mm

€23.03*

Net price: €19.35

Set distance angle bracket
003.5.552
The distance angle bracket allows the universal clamping rail to be fixed to the wall for an even greater distance between the tool and the wall and allows the rail to be positioned at the desired angle for ergonomic tool handling. The angle can be adjusted as required. 2 pcs. distance angle bracket (003.4.552) 2 pcs. thread furrow- de screw M 6 x 16 (003.4.665) 4 oval head screw M 6 x 12 (003.4.515) 4 pcs. locking tooth nut M 6 (003.4.525) Dimensions: 95 x 70 x 25 x 2 mm Material: stainless steel Distance from the middle of the rail to the wall: 60 / 70 / 80 mm Attention: The universal clamping rail is not included in this set! You can buy it in your desired length.

€26.42*

Net price: €22.20

Pendulum lock for torque wrench
003.5.096
Magnetic holder, strongly adheres to ferritic and round surfaces. Secures the torque wrench against swinging. Standard colour: black-grey Dimensions: 32 x 60 x 23 mm

€27.13*

Net price: €22.80

Universal clamping rail - fixed length
003.4.166
Länge: 1495 mm
The K.Lean tool holders are variably attached to the patented universal clamping rail. The clamping rail is extruded from aluminium profiles and anodised. Together with the separately available tool holders, it offers a unique, linear and flexible organization system. In free-floating use, the clamping rail unfolds its full potential: The system offers access to the tools, transparent workstations and additional depth (which benefits the offset mounting of tool shadows or special holders). The rail's closed top profile prevents coarse soiling. Sliding nut slides are located at the back and at the bottom, which can be used toattach various accessories(special holders, tool shadows). The universal clamping rail is part of the workbench attachments and the mounting trolley. It is available individually and by the metre for individual designs and applications. The clamping rail can be easily attached to walls and other flat surfaces in addition to the floating installation.

Variants from €19.64*
€28.56*

Net price: €24.00

Support pour distributeur de ruban adhésif
003.5.1275
Klebebandabroller: Halter ohne Klebebandabroller
Support pratique pour un accès rapide et facile à votre distributeur de ruban adhésif. Posez le distributeur rapidement et facilement. Si vous installez votre station d'emballage, votre établi ou votre lieu de travail conformément aux directives 5S, vous devez utiliser des supports pour assurer un accès rapide et ergonomique à votre distributeur de ruban adhésif et, en même temps, prévoir un espace réservé pour l'appareil conformément aux principes 5S. Vous obtiendrez ainsi un ordre et une propreté à long terme à la table d'emballage. Support 3 en 1 pour distributeur de table : Comme support pour le distributeur de ruban adhésif pour colis sur la table Pour une fixation murale à l'avant Pour un montage à un angle de 90° sur l'établi, la table d'emballage ou le lieu de travail  le dessin intelligent vous pouvez fixer le support de 3 manières différentes, vous pouvez le modifier à tout moment car aucune autre fixation n'est nécessaire. Il suffit d'ouvrir les vis, de tourner le support dans la position souhaitée et de le resserrer. Avantages Un distributeur de ruban adhésif prêt à l'emploi accessible de manière ergonomique crée de l'ordre et de la propreté dans la station d'emballage facilité d'installation Utilisation flexible de vos rubans adhésifs Livraison facultative avec ou sans Distributeur de ruban adhésif. Livraison cependant toujours sans rouleau de ruban adhésif.

€32.73*

Net price: €27.50

Tool holder for angle and stop angle
003.5.840
Professional holder, no more slipping, rattling and falling out when driving with the tool assembly trolley. The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Manufactured from indestructible stainless steel sheets. Adjustable to different sizes. The opening dimension of the holder is designed for a leg width of the stop angle of 20-40 mm.  Dimensions: 174 x 90 x 30 mm

€40.76*

Net price: €34.25

Tool holder for angle grinder (D 125 mm)
003.5.710
Kabelhalter: mit Kabelhalter
Manufactured as angle bracket for universal mounting on the tool trolley. The angle grinder is hooked into the shaped pocket. Optionally you can get a screw-on cable hook to clean up cable-operated angle grinders. Dimensions: 162 x 140 x 60 mm

Variants from €24.63*
€45.70*

Net price: €38.40