K.Lean Station 300-3 - stainless steel

K.Lean Station 460-6 mobile - The luxury liner on wheels The K.Lean Station 460-6 Mobile is the counterpart to the K.Lean Cleaning Station 460-6 Wall mounted. Standing on wheels, this cleaning station is a practical all-rounder for 6 cleaning machines. You will find a double broom load to distinguish between fine and coarse sweepings, a practical paper towel dispenser and a shelf for a waste bin integrated. Not only the tool holders are designed for quick access but also the hand brushes are angled in ergonomic K.Lean design to lie ideally in the hand guide. By labelling the K.Lean Station you show your employees and visitors that order and cleanliness at this workplace is very important to you and that you are implementing the 5S guidelines. With this cleaning station you have all the equipment to keep the workplace clean very quickly at hand and avoid long search times and wasted ways. Features: The galvanized floor pan has two fixed and two swivel castors (d=100mm), easy-running blue wheels and is made of 2 mm thick sheet steel for stability and powder-coated in RAL 2004 orange. The blue elastic wheel covering (blue wheels) gives the cleaning station perfect sliding properties. It can therefore be moved very quietly, floor-protecting and vibration-damping. The practical and ergonomic push handle allows you to move the station easily between work areas. Large, white information board, labelled with K.Lean Station, including shadow images of dustpan and hand brushes. Ergonomically shaped stainless steel holder for flat shovel, Holstein shovel or Hallenser aluminium edge shovel with round pressed handle shaft (not riveted) holder for 2 hall brooms for 400 - 600 mm broom width With all K.Lean Stations, all cleaning devices can generally be placed in the same way as they are held in the hand during work. It is no longer necessary to move around! rear storage tray for various utensils Paper roll holder with sharp-edged tear-off bar - max. width of paper roll 400 mm Space for a waste bin (400 x 400 mm) Operating and assembly instructions Equipped with cleaning set 460-6 one pc. Hallenser aluminium edge shovel size 7 with steam-bent ash handle 1 pc. broom 600 mm - mixed hair for fine sweeping 1 pc. broom 600mm - Arenga for coarse sweeping material 1 reinforced dustpan with rubber lip 1 pc. K.Lean Ergo hand brush - horsehair for fine sweeping 1 pc. K.Lean Ergo hand sweeper - Arenga for coarse sweeping 1 pc. cleaning cloth roll, blue, 2-ply, 1,000 tears, 360 m,   1 pc. plastic waste bin "Eco-Top" 40L with folding lid Dimensions: H x W x D  - Weight: (without packaging) without cleaning equipment: 1.800 x 600 x  470 mm - 35 kg with cleaning equipment:  1,980 x 1,010 x 570 mm - 47 kg Assembly instructions The K.Lean Station 460-4, 460-5 and 460-6 are screwed on a one-way pallet 800x620 and delivered stretched with opal foil. For reasons of possible transport damage, the wheels are supplied loose with screws. The holders for the Hallenser edge shovel and hall broom must be screwed over from the transport safe position according to the assembly instructions.

Cleaning island, consisting of: Galvanized floor tub as chassis, consisting of two roller-bearing fixed and two swivel castors with brake, D=100mm, elastic "blue wheels", soft castors two lateral support cheeks, made of 2mm thick sheet steel, powder-coated, orange RAL 2004, with push handle. Holder for 6 cleaning devices, holder and cleaning cloth roller with tear-off rail, floor-side base between the side cheeks for 40l waste bins, space for second waste bin with height-adjustable pick-up hooks for fixing the various SULO waste bin types. Large information and equipment carrier board white RAL 9010, labelled with K.Lean Station and shadow illustration for dustpan and hand brush rear storage tray at the station for various utensils with partition wall for additional installations: can/bottle holder etc Equipment carrier upper row of holders on the cleaning island for: flat shovel Holstein shovel or aluminium shovel with round pressed handle shaft (not riveted) and Double holder for 2 room brooms for 400 - 600 mm broom width, to take brooms with different bristle equipment. Lower row of holders on the cleaning island for: ergonomic plug-in holder for 1 dustpan 2 ergonomic plug-in holders for hand brushes with different bristles Paper roll holder with tear-off rail max. width of paper roll 420 mm Parking space for waste bins Parking space with attachment possibility for Sulo plastic waste bins, ww. 35l, 50l or 50 l galvanized sheet steel waste bin Dimensions: W x H x D: 950 x 1,300 x 450 mm Weight: 40,00 kg Delivery includes equipment. Equipped with cleaning set 980-1 one pc. Hallenser aluminium edge shovel, diamond pioneer of IdealSpaten, with pressed handle shaft (not riveted) 2 room brooms 600 mm broom width: 1 with hair mixture for light material,1 with Arenga fibre for heavy material 1 dustpan, pressed sheet steel, galvanized, with wooden handle and rubber lip 2 Ergo hand brushes with cranked handle - for easier handling and more even abrasion1Pcs. with hair mixture for fine sweeping material,1 Pcs. with arena fibre for coarse sweeping material. 1 pc. cleaning cloth roller 2-ply, blue, width 380 mm, 1,000 tears 1 pc. plastic waste bin 40l with double flap 1 pc. optionally 30L or 50L SULO plastic waste bin  or 50L galvanized sheet steel waste bin The only difference between the three available variants is in the type of bin on the right

K.Lean Station 500-4 - for 4 cleaning machines made of sheet steel, powder-coated in white RAL 9010. Designed as a large information board, labelled with "K.LeanStation" and a shadow image of the sweeping set (dustpan and hand brush). The screw-on device holders, which are loosely enclosed in the packaging, are made of stainless steel and help the product to look good and durable. Ergonomic holders for dustpan and hand brush. These can be inserted very quickly and Lean next to each other in the working position and can also be optimally removed again. Mounting with 4 screw holes D = 6.5 mm Weight: 5.8 kg Scope of delivery: Device holders on top for edge shovel and hall broom. Flat shovel Holstein shovel or aluminium edge shovel with round pressed shaft (not with riveted shaft) Hall broom for 400-600mm mm broom width Bottom device holders for dustpan and hand brush Dustpan (for pressed sheet steel dustpan) Ergo long handle hand brush 1x flat shovel, Halle aluminium edge shovel, Diamant Pionier size 7 with pressed handle 1x broom 600mm wide, mixed hair, for light sweeping 1x dustpan, sheet steel pressed with wooden handle 1x Ergo long handle hand brush for light sweeping material, mixed hair Assembly and operating instructions

For use in factory halls, warehouses, individual workstations, machine tools, if no columns and walls allow the cleaning station to be positioned visibly. Station 300-3 with mobile stand Device holders for: hall broom up to 600 mm width Dustpan metal and long handle hand brush Scope of delivery: Heavy steel base plate(400x400x15 mm, weight approx. 18 kg)mobile with 4 swivel castors D= 50 mm,2 of which with brakes coated grey stainless steel column 60,3 x 2 x 1700 mm K.Lean Station 300-3 mounted Assembly and operating instructions   Delivery mounted on a pallet including equipment.   Equipped with cleaning set 300-3 1 hall broom, 600mm broom width with horse hair mixture for light sweeping 1 hand brush with horse hair mixture for light sweeping 1 dustpan, sheet steel pressed with wooden handle

For use in factory halls when no columns and walls allow the cleaning station to be positioned visibly. Station 500-4 with mobile stand Device holders for : K.Lean hall broom up to 600 mm width Hallenser aluminium edge shovel diamondpioneer of IDEAL spade size 7 - protective edge Metal dustpan with rubber lip and Ergo long handle Hand brush Scope of delivery: Heavy steel base plate (400x400x15 mm, weight approx. 18 kg) mobile with 4 swivel castors D= 50 mm, 2 of which are lockable. coated grey stainless steel column 60,3 x 2 x 1700mm K.Lean Station 500-4 mounted Equipped with cleaning set 500-4 Set consisting of: Hallenser aluminium edge shovel (003.4.335) Shovel handle (003.4.336) broom with horsehair mixture (003.4.337) a broom handle (003.4.339) one Ergo long handle hand brush fine (003.4.951) one dustpan with lip (003.4.343) Assembly and operating instructions Delivery mounted on a pallet including equipment.  

A universal broom holder for the wall to hold the sweeping set that belongs to every modern workplace.It has been developed according to 5 S aspects : hanging, working, hanging of the cleaning equipment without having to reach around,so it can be positioned according to ergonomic aspects. Have your broom and dustpan always at hand with this holder and end time consuming searches. 2-piece, consisting of 2mm stainless steel parts. Dimensions: 245 x 76 x 68 mm Weight: 0,4 kg Device pre-assembled. Supplied with cleaning equipment:  1 dustpan with lip 1 long handle hand brush horsehair  

K.Lean Station 500-4 - for 4 cleaning machines made of sheet steel, powder-coated in white RAL 9010. Designed as a large information board, labelled with "K.LeanStation" and a shadow image of the sweeping set (dustpan and hand brush). The screw-on device holders, which are loosely enclosed in the packaging, are made of stainless steel and help the product to look good and durable. Ergonomic holders for dustpan and hand brush. These can be inserted very quickly and Lean next to each other in the working position and can also be optimally removed again. Mounting with 4 screw holes D = 6.5 mm Weight: 5.8 kg Scope of delivery: Device holders on top for edge shovel and hall broom. Flat shovel Holstein shovel or aluminium edge shovel with round pressed shaft (not with riveted shaft) Hall broom for 400-600mm mm broom width Bottom device holders for dustpan and hand brush Dustpan (for pressed sheet steel dustpan) Ergo long handle hand brush 1x flat shovel, Halle aluminium edge shovel, Diamant Pionier size 7 with pressed handle 1x broom 600mm wide, mixed hair, for light sweeping 1x dustpan, sheet steel pressed with wooden handle 1x Ergo long handle hand brush for light sweeping material, mixed hair Assembly and operating instructions

The K.Lean Station 300-3 was especially designed for warehouses, single workstations and machine tools where perfection is expected from the cleaning station.A 4-part device holder for 3 cleaning devices for easy wall mounting, which in this version is made of 1.4301 stainless steel, withstands even the most adverse conditions. Made of 1.4301 stainless steel, white information foil with foil label K.Lean.  Brackets for: Hall broom for broom width 400-600mm Hand brush with wooden handle Dustpan (for pressed sheet steel dustpan) Hand brushes can be removed again in a practical, ergonomic and optimal way even in working position.   Mounting with 2 / 4 screw holes d=6,5mm.   Space requirement Width / Height (without devices):   400 mm / 450 mm   Scope of delivery (with equipment): K.Lean 300-3 equipment carrier made of stainless steel with holders for above mentioned cleaning equipment broom 600mm wide, mixed hair Hand brush with wooden handle, mixed hair Dustpan (for pressed sheet steel dustpan) Assembly and operating instructions

Plastic sleeve with base e.g. for storing and providing cable ties, cans, bottles, tools, etc. With this practical plastic tube, in combination with our holder for spray cans, you can create a very individual solution for storing your tools and work equipment. Through the bottom nothing can leak, fall out or get away. Due to the different heights you can adapt your assembly trolley or workstation to your needs. Outside diameter = 75mm available sleeve heights: 125 mm / 200 mm / 250 mm Scope of delivery: Plastic sleeve with base - WITHOUT stainless steel holder.   ATTENTION: The holder (with D = 75 mm) must be ordered separately

K.Lean Station 500-4 - for 4 cleaning machines made of sheet steel, powder-coated in white RAL 9010. Designed as a large information board, labelled with "K.LeanStation" and a shadow image of the sweeping set (dustpan and hand brush). The screw-on device holders, which are loosely enclosed in the packaging, are made of stainless steel and help the product to look good and durable. Ergonomic holders for dustpan and hand brush. These can be inserted very quickly and Lean next to each other in the working position and can also be optimally removed again. Mounting with 4 screw holes D = 6.5 mm Weight: 5.8 kg Scope of delivery: Device holders on top for edge shovel and hall broom. Flat shovel Holstein shovel or aluminium edge shovel with round pressed shaft (not with riveted shaft) Hall broom for 400-600mm mm broom width Bottom device holders for dustpan and hand brush Dustpan (for pressed sheet steel dustpan) Ergo long handle hand brush 1x flat shovel, Halle aluminium edge shovel, Diamant Pionier size 7 with pressed handle 1x broom 600mm wide, mixed hair, for light sweeping 1x dustpan, sheet steel pressed with wooden handle 1x Ergo long handle hand brush for light sweeping material, mixed hair Assembly and operating instructions

Plastic sleeve with base e.g. for storing and providing cable ties, cans, bottles, tools, etc. With this practical plastic tube, in combination with our holder for spray cans, you can create a very individual solution for storing your tools and work equipment. Through the bottom nothing can leak, fall out or get away. Due to the different heights you can adapt your assembly trolley or workstation to your needs. Outside diameter = 75mm available sleeve heights: 125 mm / 200 mm / 250 mm Scope of delivery: Plastic sleeve with base - WITHOUT stainless steel holder.   ATTENTION: The holder (with D = 75 mm) must be ordered separately