Quiver for cordless screwdriver

The universal tool holder can hold the following tools: Screwdriver Open-end spanner, open-end box wrench pliers, scissors etc. all bar-like tools with round or polygonal cross-sections Measuring equipment and other tools. With a magnetic holding force of two times 20 N per holder it is the universal talent among tool holders.  The variable concept of the universal tool holder makes unused special holders from set offers a thing of the past: The tool holder adapts to the requirements of the workplace. If required, it can be clipped onto the universal clamping rail with a single movement! Completely without tools and without further securing! It can be removed just as quickly. Horizontally, the holder can be moved continuously on the clamping rail. The lateral stop bar ensures vertical alignment of the tool. The stop is set to the right, left, double-sided or passive by simply changing the position.The tool is located 30 mm away from the rear edge of the holding rail. This allows quick and easy access to the tool and its return. Minimum purchase: 25 pieces

Professional holder, no more slipping, rattling and falling out when driving with the tool assembly trolley. The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Manufactured from indestructible stainless steel sheets. Adjustable to different sizes. The opening dimension of the holder is designed for a leg width of the stop angle of 20-40 mm.  Dimensions: 174 x 90 x 30 mm

Manufactured as angle bracket for universal mounting on the tool trolley. The angle grinder is hooked into the shaped pocket. Optionally you can get a screw-on cable hook to clean up cable-operated angle grinders. Dimensions: 162 x 140 x 60 mm

Tool holder for 1/4'' sockets and 1/4'' bits for 11 sockets:SW 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13 for 7 bits, hexagon socket:SW 2.5; 3; 3.5; 4; 5; 6; 8 Stainless steel housing The K.Lean tool holder for 1/4'' sockets is supplied unfitted. length of the holder: 355mm

Bottle holder to extend the mobile and stationary K.Lean stations. adjustable to cover different bottle diameters Ø76-Ø93 possible. Suitable for 1,5L PET bottle for cleaning agents, cleaning emulsions, etc. suitable for K.Lean Station 460 and 980

Screwdrivers and similar tools with a diameter of less than 13 mm are quickly and ergonomically accessible via the quiver holder.The holder is an alternative for tools without iron components, which do not stick to the magnetic universal tool holder.The quiver holder is fixed with a sliding nut and a knurled screw (included in the scope of delivery) is attached to the lower link of the universal clamping rail.

Stable tool holder for 1,000 g hammer or mitten. Safely encloses the tool to prevent it from falling out.  The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Can also be mounted directly on a wall. Manufactured from indestructible stainless steel sheets. Dimensions: 174 x 90 x 30 mm

Tool holder for 1/2'' sockets for 10 sockets SW 10,11,12,13, 17, 19, 22, 24, 27, 30 Housing: stainless steel The K.Lean tool holder for 1/2'' sockets is supplied unloaded. length of the holder: 355mm

Mobile assembly trolley MW 620 The mobile assembly trolley was specially designed for series and individual assembly in the workshop. Fast and flexible access to assembly materials The sturdy shelves can be fitted with storage viewing boxes 400 x 100 mm, optionally with 115 mm width or 230 mm width. The design of the mounting trolley provides for either horizontal mounting (standard) of the shelves or, if desired, conversion so that the shelves are inclined at an angle of 20° to the front. The mobile workstation is supplemented by screw boxes, optionally size 1 or 2, for hanging in the support rails. Dimensions: 650 x 450 x 1,900 mm Individual widths available on request! The assembly trolley is supplied with: galvanized, 2 mm thick base plate, Ø100 mm castors (2 fixed, 2 swivel/brake castors) as chassis, 30 mm thick multiplex top made of beech wood as an indestructible worktop, 5 sturdy shelves, 620 x 405 mm, to be fitted with transparent storage boxes, 1 support rails for hanging screw boxes 2 universal clamping rails, 25 pcs. Universal Tool Holders Delivery assembled and packed on one-way pallets without storage view boxes. Recommended equipment options: Storage viewing box 400 x 100 x 230 mm Storage viewing box 400 x 100 x 115 mm  Partition wall for transparent storage box 230 x 100 mm  Partition wall for storage viewing box 115 x 100 mm  Quiver for drill screwdriver Holder for sweeping set, mounted Holder for sweeping broom

The mobile assembly trolley is specially designed for series and individual assembly in the workshop. An indestructible, 30 mm thick multiplex board made of beech wood serves as a worktop.  Screw boxes for small parts are suspended on two carrier rails. Galvanized floor plate 5 galvanized steel shelves mounted horizontally as standard to store the optionally available transparent storage boxes. Chassis with Ø100 mm rollers. 2x swivel castor, 2x fixed castor. 2x K.Lean universal clamping rail pre-assembled. 1x support rail pre-assembled for hanging screw boxes. 25 pcs. K.Lean universal tool holder pre-assembled. Ergonomic handle for moving the trolley mounted on one side. On request the trolley can also be converted to shelves for KLT boxes 400x300. Optionally available are a screwdriver holder and a tool holder set(consisting of a universal clamping rail with mounting profiles and 20 universal tool holders). The mounting trolley is delivered fully assembled on a stable disposable plate. Included in delivery are assembly instructions and all necessary screws. Dimensions: 950 x 450 x 1350 mm.

The K.Lean tool holders are variably attached to the patented universal clamping rail. The clamping rail is extruded from aluminium profiles and anodised. Together with the separately available tool holders, it offers a unique, linear and flexible organization system. In free-floating use, the clamping rail unfolds its full potential: The system offers access to the tools, transparent workstations and additional depth (which benefits the offset mounting of tool shadows or special holders). The rail's closed top profile prevents coarse soiling. Sliding nut slides are located at the back and at the bottom, which can be used toattach various accessories(special holders, tool shadows). The universal clamping rail is part of the workbench attachments and the mounting trolley. It is available individually and by the metre for individual designs and applications. The clamping rail can be easily attached to walls and other flat surfaces in addition to the floating installation.

The universal tool holder can hold the following tools: Screwdriver Open-end spanner, open-end box wrench pliers, scissors etc. all bar-like tools with round or polygonal cross-sections Measuring equipment and other tools. With a magnetic holding force of two times 20 N per holder it is the universal talent among tool holders.  The variable concept of the universal tool holder makes unused special holders from set offers a thing of the past: The tool holder adapts to the requirements of the workplace. If required, it can be clipped onto the universal clamping rail with a single movement! Completely without tools and without further securing! It can be removed just as quickly. Horizontally, the holder can be moved continuously on the clamping rail. The lateral stop bar ensures vertical alignment of the tool. The stop is set to the right, left, double-sided or passive by simply changing the position.The tool is located 30 mm away from the rear edge of the holding rail. This allows quick and easy access to the tool and its return. Minimum purchase: 25 pieces

The TurnMan Welding turner is a cost effective alternative to expensive, electric turner to turn parts up to 300 kg with little force in order to improve the accessibility of welds and thus reduce the throughput time. This rotary turner gives you maximum flexibility through short set-up times and fast training of your employees. Adjust your fixtures to the mounting plate so that you can convert the rotary turner to the new component within minutes. The concept of this rotary turner is to turn and set up parts that are symmetrical to the centre of gravity easily and inexpensively. The system offers a locking in 15° steps with a patented spring bolt. Basic Version This minimum configuration is designed for rotationally symmetrical components which are screwed on here at the centre of gravity and can thus be rotated with little force.  Its particularly simple operation allows it to be used economically even by untrained personnel, both in small and medium batch production. The axis of rotation is bolted to the base frame, height adjustable for higher components. Optional with hydraulic, vertical lift (see other TurnMan variants) incl. wheel set mounted (2x brake/steering roller, 1x rigid)   Technical data Payload 300 kg lowest Loading height 600 mm Height axis of rotation 725-900 mm Overall height 1,360-1585 mm Occupational safety A sample operating manual can be found in the tab PDF here in the article or here . You should adapt these to your company. Please contact us to receive an editable Word template.