The K.Lean tool holders are variably attached to the patented universal clamping rail.
The clamping rail is extruded from aluminium profiles and anodised. Together with the separately available tool holders, it offers a unique, linear and flexible organization system.
In free-floating use, the clamping rail unfolds its full potential:
The system offers access to the tools, transparent workstations and additional depth (which benefits the offset mounting of tool shadows or special holders).
The rail's closed top profile prevents coarse soiling. Sliding nut slides are located at the back and at the bottom, which can be used toattach various accessories(special holders, tool shadows).
The universal clamping rail is part of the workbench attachments and the mounting trolley. It is available individually and by the metre for individual designs and applications.
The clamping rail can be easily attached to walls and other flat surfaces in addition to the floating installation.
A tool holder whose clamping force can be perfectly adjusted was the wish of our customers. We have fulfilled this request and developed this intelligent tool holder. By means of the adjusting screws you can ideally adjust the width and pretension of the tool clamping range.
This guarantees maximum efficiency and ergonomics.
Available sizes (adjustment ranges):
0-10 mm
11-30 mm
Currently only available on request.
Professional holder, no more slipping, rattling and falling out when driving with the tool assembly trolley.
The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail.
Manufactured from indestructible stainless steel sheets.
Adjustable to different sizes.
The opening dimension of the holder is designed for a leg width of the stop angle of 20-40 mm.
Dimensions: 174 x 90 x 30 mm
Stable tool holder for 1,000 g hammer or mitten. Safely encloses the tool to prevent it from falling out.
The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely.
Prepared for mounting on the K.Lean universal clamping rail. Can also be mounted directly on a wall.
Manufactured from indestructible stainless steel sheets.
Dimensions: 174 x 90 x 30 mm
Locating bolt for sockets 1/2" for sliding nut M4 for fixing to the universal clamping rail.
Fastening by means of slide nut in the rail.
Dimensions: 9.5 - M4 mm
Minimum purchase: 25 pieces
The universal tool holder can hold the following tools:
Screwdriver
Open-end spanner, open-end box wrench
pliers, scissors etc.
all bar-like tools with round or polygonal cross-sections
Measuring equipment
and other tools.
With a magnetic holding force of two times 20 N per holder it is the universal talent among tool holders.
The variable concept of the universal tool holder makes unused special holders from set offers a thing of the past: The tool holder adapts to the requirements of the workplace. If required, it can be clipped onto the universal clamping rail with a single movement! Completely without tools and without further securing! It can be removed just as quickly.
Horizontally, the holder can be moved continuously on the clamping rail. The lateral stop bar ensures vertical alignment of the tool. The stop is set to the right, left, double-sided or passive by simply changing the position.The tool is located 30 mm away from the rear edge of the holding rail. This allows quick and easy access to the tool and its return.
Minimum purchase: 25 pieces
Screwdrivers and similar tools with a diameter of less than 13 mm are quickly and ergonomically accessible via the quiver holder.The holder is an alternative for tools without iron components, which do not stick to the magnetic universal tool holder.The quiver holder is fixed with a sliding nut and a knurled screw (included in the scope of delivery) is attached to the lower link of the universal clamping rail.
The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail.
Manufactured from indestructible stainless steel sheets.
Dimensions: 174 x 90 x 30 mm
Manufactured as angle bracket for universal mounting on the tool trolley. The angle grinder is hooked into the shaped pocket.
Optionally you can get a screw-on cable hook to clean up cable-operated angle grinders.
Dimensions: 162 x 140 x 60 mm
Locating bolt for sockets 3/8" for sliding nut M4 for fixing to the universal clamping rail.
Fastening by means of sliding nut.
Dimensions: 9.5 - M4 mm
Minimum purchase: 25 pieces
Locating bolt for sockets 3/8" for sliding nut M4 for fixing to the universal clamping rail.
Fastening by means of sliding nut.
Dimensions: 9.5 - M4 mm
Minimum purchase: 25 pieces
Locating bolt for sockets 1/2" for sliding nut M4 for fixing to the universal clamping rail.
Fastening by means of slide nut in the rail.
Dimensions: 9.5 - M4 mm
Minimum purchase: 25 pieces
A tool holder whose clamping force can be perfectly adjusted was the wish of our customers. We have fulfilled this request and developed this intelligent tool holder. By means of the adjusting screws you can ideally adjust the width and pretension of the tool clamping range.
This guarantees maximum efficiency and ergonomics.
Available sizes (adjustment ranges):
0-10 mm
11-30 mm
Currently only available on request.
Mobile assembly trolley MW 620
The mobile assembly trolley was specially designed for series and individual assembly in the workshop.
Fast and flexible access to assembly materials
The sturdy shelves can be fitted with storage viewing boxes 400 x 100 mm, optionally with 115 mm width or 230 mm width. The design of the mounting trolley provides for either horizontal mounting (standard) of the shelves or, if desired, conversion so that the shelves are inclined at an angle of 20° to the front. The mobile workstation is supplemented by screw boxes, optionally size 1 or 2, for hanging in the support rails.
Dimensions: 650 x 450 x 1,900 mm
Individual widths available on request!
The assembly trolley is supplied with:
galvanized, 2 mm thick base plate,
Ø100 mm castors (2 fixed, 2 swivel/brake castors) as chassis,
30 mm thick multiplex top made of beech wood as an indestructible worktop,
5 sturdy shelves, 620 x 405 mm, to be fitted with transparent storage boxes,
1 support rails for hanging screw boxes
2 universal clamping rails,
25 pcs. Universal Tool Holders
Delivery assembled and packed on one-way pallets without storage view boxes.
Recommended equipment options:
Storage viewing box 400 x 100 x 230 mm
Storage viewing box 400 x 100 x 115 mm
Partition wall for transparent storage box 230 x 100 mm
Partition wall for storage viewing box 115 x 100 mm
Quiver for drill screwdriver
Holder for sweeping set, mounted
Holder for sweeping broom
€1,031.73*
Net price:€867.00
Shipping country outside Germany
In your country, only self-pickup is possible. Feel free to request a quote.
This website uses cookies to ensure the best experience possible. More information...