K.Lean Station 460-5 Mobil

K.Lean Station 460-4 mobile - The compact, mobile cleaning island The K.Lean Station 460-4 Mobil is a compact and modern cleaning island on wheels to fulfill your cleaning tasks. Placed on wheels, this cleaning station is a practical all-rounder for 4 cleaning machines. Use this modern cleaning station to create and maintain order and cleanliness according to the 5 S principle in your production or storage facility. As a kind of system trolley it combines the practical holders for broom, Hallenser aluminium edge shovel, hand brush and dustpan with a 40 l waste bin for the used paper towels or other waste. This cleaning trolley shows through its decorative lettering with K.Lean Station as well as its printed shadowgraphs for dustpan and hand brush the effect you want to convey to your employees and visitors that cleanliness and order at your workplaces are very important to you and that you are also aware of the 5S guidelines. With this cleaning station you now have all the equipment you need to keep your workplace clean within easy reach and avoid long search times and wasted journeys. Features: The galvanized floor pan has two fixed and two swivel castors (d=100mm), easy-running blue wheels and is made of 2 mm thick sheet steel for stability and powder-coated in RAL 2004 orange. The blue elastic wheel covering (blue wheels) gives the cleaning station perfect sliding properties. It can therefore be moved very quietly, floor-protecting and vibration-damping. A practical and ergonomically shaped push handle allows you to move the station comfortably between work areas. White information board, labelled with K.Lean Station, including shadow images of dustpan and hand brushes. Side panels in "waste collection orange" to create a lighthouse effect in your company ergonomically shaped stainless steel holder for flat shovel, Holsteiner shovel or Hallenser aluminium edge shovel with round pressed handle shaft (not riveted) holder for 2 hall brooms for 400 - 600 mm broom width With all K.Lean Stations, all cleaning devices can generally be placed in the same way as they are held in the hand during work. It is no longer necessary to move around! rear storage tray for various utensils Paper roll holder with sharp-edged tear-off bar - max. width of paper roll 400 mm Space for a waste bin (400 x 400 mm) Operating and assembly instructions Equipped with cleaning set 460-4 one pc. Hallenser aluminium edge shovel size 7 with steam-bent ash handle 1 pc. broom 600 mm - mixed hair for fine sweeping 1 reinforced dustpan with rubber lip 1 pc. K.Lean Ergo hand brush - horsehair for fine sweeping 1 pc. cleaning cloth roll, blue, 2-ply, 1,000 tears, 360 m,   1 pc. plastic waste bin "Eco-Top" 40L with folding lid Dimensions: H x W x D  - Weight: (without packaging) without cleaning equipment: 1.800 x 600 x  470 mm - 36 kg with cleaning equipment:  1,980 x 1,010 x 570 mm - 46 kg Assembly instructions The K.Lean Station 460-4, 460-5 and 460-6 are screwed on a one-way pallet 800x620 and delivered stretched with opal foil. For reasons of possible transport damage, the wheels are supplied loose with screws. The holders for the Hallenser edge shovel and hall broom must be screwed over from the transport safe position according to the assembly instructions.

Cleaning island, consisting of: Galvanized floor tub as chassis, consisting of two roller-bearing fixed and two swivel castors with brake, D=100mm, elastic "blue wheels", soft castors two lateral support cheeks, made of 2mm thick sheet steel, powder-coated, orange RAL 2004, with push handle. Holder for 6 cleaning devices, holder and cleaning cloth roller with tear-off rail, floor-side base between the side cheeks for 40l waste bins, space for second waste bin with height-adjustable pick-up hooks for fixing the various SULO waste bin types. Large information and equipment carrier board white RAL 9010, labelled with K.Lean Station and shadow illustration for dustpan and hand brush rear storage tray at the station for various utensils with partition wall for additional installations: can/bottle holder etc Equipment carrier upper row of holders on the cleaning island for: flat shovel Holstein shovel or aluminium shovel with round pressed handle shaft (not riveted) and Double holder for 2 room brooms for 400 - 600 mm broom width, to take brooms with different bristle equipment. Lower row of holders on the cleaning island for: ergonomic plug-in holder for 1 dustpan 2 ergonomic plug-in holders for hand brushes with different bristles Paper roll holder with tear-off rail max. width of paper roll 420 mm Parking space for waste bins Parking space with attachment possibility for Sulo plastic waste bins, ww. 35l, 50l or 50 l galvanized sheet steel waste bin Dimensions: W x H x D: 950 x 1,300 x 450 mm Weight: 40,00 kg Delivery includes equipment. Equipped with cleaning set 980-1 one pc. Hallenser aluminium edge shovel, diamond pioneer of IdealSpaten, with pressed handle shaft (not riveted) 2 room brooms 600 mm broom width: 1 with hair mixture for light material,1 with Arenga fibre for heavy material 1 dustpan, pressed sheet steel, galvanized, with wooden handle and rubber lip 2 Ergo hand brushes with cranked handle - for easier handling and more even abrasion1Pcs. with hair mixture for fine sweeping material,1 Pcs. with arena fibre for coarse sweeping material. 1 pc. cleaning cloth roller 2-ply, blue, width 380 mm, 1,000 tears 1 pc. plastic waste bin 40l with double flap 1 pc. optionally 30L or 50L SULO plastic waste bin  or 50L galvanized sheet steel waste bin The only difference between the three available variants is in the type of bin on the right

The K.Lean Station 300-3 was developed especially for the warehouse, single workstations, machine tools, garages, household.A 4-part device holder for 3 cleaning devices for easy wall mounting. Made of sheet steel, powder-coated in the colour orange, RAL 2004, information foil white with foil inscription K.Lean. Holder for: hall broom for broom width 400-600mm Hand brush with wooden handle Dustpan (for pressed sheet steel dustpan) Hand brushes can be removed again in a practical, ergonomic and optimal way even in working position.   Mounting with 2 / 4 screw holes d=6,5mm.   Space requirement Width / Height (without devices):   400 mm / 450 mm   Scope of delivery: K.Lean 300-3 Equipment carrier with holders for the above mentioned cleaning equipment broom 600mm wide, mixed hair Hand brush with wooden handle, mixed hair Dustpan (for pressed sheet steel dustpan) Assembly and operating instructions

Broom station 460-5 for 2 large hall brooms (coarse + fine), 2 Ergo hand brushes (coarse + fine), dustpan and paper roll with waste bin for wall mounting This broom station not only has room for 5 cleaning devices but also has a practical paper towel dispenser and a shelf for a waste bin integrated. So no more wishes remain. This station is not only an absolutely practical utility but is also the eye-catcher par excellence. Scope of delivery one support clamp each left + right made of sheet steel 2mm, powder-coated orange RAL 2004 (with keyholes on the back for dowelling to the wall) Large information board labeled, with K.Lean Station - The basis for your lighthouse effect! With it, every employee can see how important order and cleanliness are to you. Holder for Holsteiner shovel + Hallenser aluminium shovel with round pressed handle shaft (not riveted) as well as holder for hall broom for 400 - 600 mm broom width Shelf for hand brushes (hand brushes provided with magnetic holder on the back) Dustpan and hand brush can be inserted ergonomically and practically.  Paper roll holder with tear-off rail max. width of the paper roll 380 mm. Storage area for waste bins Assembly and operating instructions Equipped with cleaning set 460-6 1 room broom 600 mm for fine sweeping material 1 room broom 600 mm for coarse sweeping material 1 pc. dustpan with lip 1 pc. Ergo hand brush mixed hair for fine sweeping 1 pc. Ergo hand brush Arenga for coarse sweeping material 1 pc. cleaning cloth roll 1 pc. plastic waste bin 40l with folding lid Mounted and packed on a one-way pallet with shrink hood.

Broom station 500-5 with mobile base with 2 hall brooms (fine + coarse), metal dustpan and 2 Ergo hand brushes (fine + coarse). Device holders for : K.Lean hall broom up to 600 mm wide for fine sweeping K.Lean hall broom up to 600 mm wide for coarse sweeping material reinforced metal dustpan  Ergo hand brush from K.Lean with horsehair tipping for fine sweeping Ergo hand sweeper from K.Lean with arena equipment for coarse sweeping material Scope of delivery: Heavy steel base plate (400x400x15 mm, weight approx. 18 kg), mobile with swivel castors D= 50 mm, coated grey- stainless steel column 60,3 x 2 mm K.Lean Station 500-5 mounted Equipped with cleaning set 500-5 Set consisting of: Broom with horse hair mixture (003.5.888) for fine sweeping material Broom with Arengahaar mixture (003.5.889) for coarse sweeping K.Lean Ergo hand brush with horse hair mixture (003.4.951) for fine sweeping material K.Lean Ergo hand brush with Arenga mixture (003.4.952) for coarse sweeping material Reinforced dustpan (003.4.342) Assembly and operating instructions Delivery mounted on a pallet including equipment.  

Testprodukt

Mobile broom station 460-5 for 2 large hall brooms (coarse + fine), 2 Ergo hand brushes (coarse + fine), dustpan and paper roll with waste bin for  Standing on wheels, this cleaning station is a practical all-rounder for 5 cleaning machines. You will find a double broom load to distinguish between fine and coarse sweepings, a practical paper towel dispenser and a shelf for a waste bin integrated. Not only the tool holders are designed for quick access but also the hand brushes are angled in ergonomic K.Lean design to lie ideally in the hand guide. By labelling the K.Lean Station you show your employees and visitors that order and cleanliness at this workplace is very important to you and that you are implementing the 5S guidelines. With this cleaning station you have all the equipment to keep the workplace clean very quickly at hand and avoid long search times and wasted ways. Features: The galvanized floor pan has two fixed and two swivel castors (d=100mm), easy-running blue wheels and is made of 2 mm thick sheet steel for stability and powder-coated in RAL 2004 orange. The blue elastic wheel covering (blue wheels) gives the cleaning station perfect sliding properties. It can therefore be moved very quietly, floor-protecting and vibration-damping. The practical and ergonomic push handle allows you to move the station easily between work areas. Large, white information board, labelled with K.Lean Station, including shadow images of dustpan and hand brushes. Holder for 2 hall brooms for 400 - 600 mm broom width With all K.Lean Stations, all cleaning devices can generally be placed in the same way as they are held in the hand during work. It is no longer necessary to move around! rear storage tray for various utensils Paper roll holder with sharp-edged tear-off bar - max. width of paper roll 400 mm Space for a waste bin (400 x 400 mm) Operating and assembly instructions Equipped with cleaning set 460-5 1 pc. broom 600 mm - mixed hair for fine sweeping 1 pc. broom 600mm - Arenga for coarse sweeping material 1 reinforced dustpan with rubber lip 1 pc. K.Lean Ergo hand brush - horsehair for fine sweeping 1 pc. K.Lean Ergo hand sweeper - Arenga for coarse sweeping 1 pc. cleaning cloth roll, blue, 2-ply, 1,000 tears, 360 m,   1 pc. plastic waste bin "Eco-Top" 40L with folding lid Dimensions: H x W x D  - Weight: (without packaging) without cleaning equipment: 1.800 x 600 x  470 mm - 35 kg with cleaning equipment:  1,980 x 1,010 x 570 mm - 47 kg Assembly instructions The K.Lean Station 460-4, 460-5 and 460-6 are screwed on a one-way pallet 800x620 and delivered stretched with opal foil. For reasons of possible transport damage, the wheels are supplied loose with screws. The holders for the Hallenser edge shovel and hall broom must be screwed over from the transport safe position according to the assembly instructions.

Heavy duty pallet transport cart at low height. So you can use this trolley as a chassis for Euro pallets. Stable steel frame construction made of pressed profiles, screwed into 4 stable corner connection consoles with guide function. Designed for handling heavy materials in the factory and in production. You can easily place the pallet on the trolley and transport it by hand to the right place without having to resort to forklifts or ants. The surface is hot-dip galvanized and therefore built for long-lasting use. Version for 1200 kg and 1800 kg load capacity available. The optionally available cross beam prevents the Euro pallet from bending or breaking through when heavy weights are placed on it. We recommend this from a load of 300 kg. Castors: 2 stable fixed castors, 2 stable swivel/brake castors Polyamide ball bearing mounted screwed on under the support legs diameter 200 mm The starting and rolling resistance of our rollers is approx. 40% lower than that of conventional transport trolleys with rollers of 150 mm diameter. Application video   Occupational Safety A sample operating manual can be found in the tab PDF here in the article or here . You should adapt these to your company. Please contact us to receive an editable Word template.