Other 5S Articles

Here we show you further useful products to implement your individual 5S strategy in production and create added value for your production and your employees.

The subject of medical first aid, turning and turning of parts and material transport is just as much a part of lean production for us. Surf through our categories which you will find below.

First Aid Station

Not only material transport and production facilities are part of lean production, but also the aspect of employees and safety is an important point.

Therefore, we have also looked at this aspect of production and have developed a product that makes the treatment of small wounds and injuries fast and efficient, thus giving your employees a feeling of safety and providing quick help in case of emergency.

Welding manipulator "TurnMan"

With our innovative product called "TurnMan" we wanted to create a low-cost variant to make the turning of heavy components easy and efficient. Low investment costs and fast set-up times as well as easy handling were our goal for you as our customer. Use the TurnMan for turning tasks in welding, assembly and quality control..

Pallet transport trolley

LMoving loads, quickly and efficiently. For this you need either expensive forklifts or our inexpensive pallet transport trolley. Move heavy loads quickly and efficiently and reduce the number of forklift truck operations in your company, thereby reducing your risk of accidents in the workplace.

Replacement roll sports plaster self-adhesive
003.4.660
self-adhesive sports plaster for application to the wound. Firming function. width: 5 cm Length: approx. 5 m For tearing off or cutting off.

€11.01*

Net price: €9.25

Manual
003.4.662
Manual to document injuries and accidents. Format: DIN A5 landscape  

€11.54*

Net price: €9.70

Replacement roller elastic soft touch plaster
003.4.659
Self-adhesive soft foam bandage as an optimal aid for small and larger cuts. Does not stick to skin, hair or wound Adheres also in water highly absorbent Latex-free 1 roll - 6 cm wide and about 5m long.

€22.97*

Net price: €19.30

Refill AKLA Plaster Dispenser
003.4.658
Refill set for the green AKLA plaster dispenser. skin coloured plaster Paving 25 mm wide and 10 m long. 100 wound dressings 25 x 20 mm

€25.29*

Net price: €21.25

Isotonic wound and eye shower
003.4.648
Isotonic wound and eye shower in the practical spray can 250 ml isotonic solution (0.9% NaCl), similar to tear fluid. in practical spray can. Sterile down to the last drop thanks to the special technique of the spray can! soft spray mist without expansion cold. in this way you rinse the eye with a pleasant, soft jet. Also ideally suited for cleaning wounds

€31.42*

Net price: €26.40

Refill Earplugs
003.4.669
Refill earplugs Moldex. Content: 250 pairs of ear plugs SNR value: 36 dB from PU foam Adapts perfectly to the ear canal   Delivery without K.Lean stainless steel holder.

€94.84*

Net price: €79.70

Hearing protection plugs Dispenser station
003.5.667
Moldex earplugs dispenser station including K.Lean stainless steel holder for mounting on the K.Lean first aid station or directly on the wall. An ideal addition for the protection of your employees and the K.Lean first aid station. Delivery including contents: 250 pairs of Moldex earplugs. SNR value: 36 dB made of PU foam Adapts ideally to the shape of the ear canal

€147.08*

Net price: €123.60

First Aid Station
003.5.735
Ausführung: Vollausstattung
First-aid station for quick wound treatment of minor workshop, office or construction site injuries. Ideal for mounting on narrow building columns. Therefore takes up very little space in width and can be mounted universally. The first aid station can be clamped around a hall girder either with dowels/screws or alternatively with steel straps, thus finding a place that is quickly accessible for injured persons everywhere. The quick supply through the eye shower in the form of a spray with which you can adjust the intensity of the irrigation yourself is a great advantage in case of eye injuries. With a very special plaster dispenser from AKLA you can easily adjust the length of your plaster yourself. You pull until the desired length is reached and close the lid. The integrated knife in the lid automatically cuts off the patch and closes the lid again to protect the patches from dust and dirt. Protect yourself and your employees and, in accordance with DIN 13157, install sufficient first aid stations in your company to guarantee employees a quick first aid possibility and thus prevent extensive injuries. Basic equipment: Station with stainless steel support plate WxHxD: 300x750x30 mm with swivel-mounted storage console as a cover support for the first-aid kit. Labelling field above the first-aid kit: upper labelling field green, white lettering for signal effect. The names of first aiders, emergency numbers and test intervals can be visibly positioned on it. First-aid box according to DIN 13157 with intelligent design and variable, 5S-compliant compartment division as well as transparent housing, so that the completeness of the contents is directly visible from the outside by the safety officer. The first-aid kit is removable and transportable for first aid for injured persons. First-aid manual in the space-saving compartment behind the first-aid box Ballpoint pen with eyelet and fastening chain, positioned in a stable workshop-suitable spring clip. For entries in the dressing book. Plaster dispenser (green, left in picture) filled with 85 detectable wound dressings, carrier foil/plaster 25 mm wide and 10 m long. Plaster skin-coloured. Due to the cutting mechanism in the lid, no scissors are required and the plaster can be cut to length individually. The system is firmly screwed on and cannot be stolen. Additional equipment of the "full equipment" version  250 ml isotonic wound and eye shower (0.9% NaCl) for the treatment of wounds and eye injuries. Stay sterile until the last drop! Roller plaster dispenser incl. soft-touch plaster. The ideal supplement for the treatment of cuts. Self adhesive soft foam bandage, does not stick to skin, hair or wound. Highly absorbent and latex-free. Plaster is 6 cm wide and 5 m long, cut to length by integrated cutting device on the holder. Additional equipment of the version "ear plugs Dispenser for earplugs including stainless steel holder. Contents: 500 pairs of Moldex earplugs made of soft PU foam. SNR value: 36 dB.

Variants from €362.95*
€512.12*

Net price: €430.35

Palettes Transport trolley "Lowliner"
003.5.675
Ausführung: Traglast 1200 kg ohne Querträger
Heavy duty pallet transport cart at low height. So you can use this trolley as a chassis for Euro pallets. Stable steel frame construction made of pressed profiles, screwed into 4 stable corner connection consoles with guide function. Designed for handling heavy materials in the factory and in production. You can easily place the pallet on the trolley and transport it by hand to the right place without having to resort to forklifts or ants. The surface is hot-dip galvanized and therefore built for long-lasting use. Version for 1200 kg and 1800 kg load capacity available. The optionally available cross beam prevents the Euro pallet from bending or breaking through when heavy weights are placed on it. We recommend this from a load of 300 kg. Castors: 2 stable fixed castors, 2 stable swivel/brake castors Polyamide ball bearing mounted screwed on under the support legs diameter 200 mm The starting and rolling resistance of our rollers is approx. 40% lower than that of conventional transport trolleys with rollers of 150 mm diameter. Application video   Occupational Safety A sample operating manual can be found in the tab PDF here in the article or here . You should adapt these to your company. Please contact us to receive an editable Word template.

€653.31*

Net price: €549.00

Palettes Transport trolley "Uploader"
003.5.676
Ausführung: Traglast 1200 kg ohne Querträger
Heavy duty pallet transport trolley at ergonomic working height. Sturdy steel frame construction made of pressed profiles, bolted into 4 sturdy corner connection consoles with guide function. 4 stable feet without cross-connection to avoid injuries to the shinbone due to cross braces. Designed for handling heavy materials in the factory and in production. So you can easily place the pallet on the trolley and transport it by hand to the right place without using forklift trucks or ants. The surface is hot-dip galvanized and therefore built for long-lasting use. Version for 1200 kg and 1800 kg load capacity available. The optionally available cross beam prevents the Euro pallet from bending or breaking through when heavy weights are placed on it. We recommend this from a load of 300 kg. Castors: 2 stable fixed castors, 2 stable swivel/brake castors Polyamide ball bearing mounted screwed on under the support legs diameter 200 mm The starting and rolling resistance of our rollers is approx. 40% lower than that of conventional transport trolleys with rollers of 150 mm diameter. Industrial safety A sample operating manual can be found in the tab PDF here in the article or here . You should adapt these to your company. Please contact us to receive an editable Word template.

€1,090.04*

Net price: €916.00

PROFI ECOLINE SET 711 für D16 System
10184
Dieses Starterset für die Demmeler Lochtisch Platten enthält eine große Auswahl an Basics die Sie benötigen um mit den Tischplatten zu arbeiten. System: D16 Bestehend aus: Anzahl Artikel-Nr. Bezeichnung 4 E16-03001-000 ECO-Anschlag- und Spannwinkel 90 × 90 × 25 mm 2 E16-03001-002 ECO-Anschlag- und Spannwinkel 90 × 37,5 × 25 mm 2 E16-05002-000 ECO-Universal- Anschlag klein L55 4 E16-05001-000 ECO-Universal-Anschlag groß L115 4 D16-07005-000 Schubschraubzwinge 180° mit Spindel 2 D16-07009-000 Schubschraubzwinge 45° mit Spindel 1 D16-10002-000 Rundbürste Ø 16 mm 1 D00-10007-000 Abziehstein 1 E16-10008-000 Sechskant-Winkelschraubendreher SW 5 8 D16-06001-000 PS-Bolzen / kurz - Ø 16-0,01, SW 8, Grenzspannbereich 20-24 mm, 10/50 kN Damit können Sie Ihren Schweißtisch oder Spanntisch perfekt ergänzen.

€1,378.02*

Net price: €1,158.00

TurnMan 300 - Basic
003.5.725
The TurnMan Welding turner is a cost effective alternative to expensive, electric turner to turn parts up to 300 kg with little force in order to improve the accessibility of welds and thus reduce the throughput time. This rotary turner gives you maximum flexibility through short set-up times and fast training of your employees. Adjust your fixtures to the mounting plate so that you can convert the rotary turner to the new component within minutes. The concept of this rotary turner is to turn and set up parts that are symmetrical to the centre of gravity easily and inexpensively. The system offers a locking in 15° steps with a patented spring bolt. Basic Version This minimum configuration is designed for rotationally symmetrical components which are screwed on here at the centre of gravity and can thus be rotated with little force.  Its particularly simple operation allows it to be used economically even by untrained personnel, both in small and medium batch production. The axis of rotation is bolted to the base frame, height adjustable for higher components. Optional with hydraulic, vertical lift (see other TurnMan variants) incl. wheel set mounted (2x brake/steering roller, 1x rigid)   Technical data Payload 300 kg lowest Loading height 600 mm Height axis of rotation 725-900 mm Overall height 1,360-1585 mm Occupational safety A sample operating manual can be found in the tab PDF here in the article or here . You should adapt these to your company. Please contact us to receive an editable Word template.

€2,791.74*

Net price: €2,346.00

TurnMan 300 - Basic with lifting carriage
003.5.728
The TurnMan Welding manipulator is designed for low force turning tasks on components up to 300 kg as a "one man" operation.  This welding manipulator is a very slim, rational device with an excellent price-performance ratio, variable applicable for welding and assembly work and offers a lot of foot space.The concept of the welding manipulator is based on the property that non-rotationally symmetrical components are brought to the respective centre of gravity of mass on the lifting unit by means of a hand crank and can thus be turned into the respective position quickly and easily with little force. The system offers locking in 15° steps with a patented spring bolt. Once the centre of gravity  has been defined by the workpiece, the working height of the  support table is determined using a setting table supplied and the system is brought into position and adjusted along a measuring ruler using only a single spindle stroke axis.  Its particularly simple operation allows it to be used economically even by untrained personnel, both in small and medium series production. The rotation axis is screwed into the base frame, height adjustable for higher components. Optionally with hydraulic, vertical stroke (see further TurnMan variants) incl. wheel set mounted (2x brake/steering roller, 1x rigid) Convenient and quick hanging of fixtures via keyholes possible. Simply take over the hole patterns into your jigs and fixtures and then attach them quickly and flexibly to the TurnMan (see picture) Technical data Payload 300 kg lowest Loading height 600 mm Useful stroke 430 mm Height axis of rotation 725-900 mm Overall height 1,360-1585 mm Occupational safety A sample operating manual can be found in the tab PDF here in the article or here . You should adapt these to your company. Please contact us to receive an editable Word template.

€5,255.04*

Net price: €4,416.00

Health & Safety Station
003.5.1286
Health & Safety Station - Central board for first aid, fire protection and emergency information. Expandable with AED. The K.Lean Health & Safety Station is intended as a central board within the production to enable quick access to first aid, fire protection and emergency information. It offers: Stretcher First aid station for quick wound care Emergency plans First-aid display Fire blanket 2 fire extinguishers AED (optional)  The station comes pre-assembled and can be mounted directly by you. It is attached to the wall and supported by the 2 aluminum profiles on the floor. This means that plywood walls or Regips walls can also be used. Optionally possible: AED / defibrillator including wall mount: Here there are several different options, which is why we only offer this as an option and in coordination of your needs. You can also use your own AED stations here. The space for this has been provided. 2 Fire Extinguishers: Firefighting should always be done with at least 2 people if possible. Therefore we have installed 2 fire extinguishers. You can choose whether you want to have powder or CO2 variant. Height x width:  2225mm x 1700 mm Individual inscription: You have a name for your safety campaign? Then let us individualize your Health & Safety Station. Feel free to ask us to apply your own logo to the station.   On request, individual equipment:  Just send us an inquiry with your requirements.  

€5,910.73*

Net price: €4,967.00

TurnMan 300 - Basic
005.5.1140
The TurnMan Welding turner is a cost effective alternative to expensive, electric turner to turn parts up to 300 kg with little force in order to improve the accessibility of welds and thus reduce the throughput time. This rotary turner gives you maximum flexibility through short set-up times and fast training of your employees. Adjust your fixtures to the mounting plate so that you can convert the rotary turner to the new component within minutes. The concept of this rotary turner is to turn and set up parts that are symmetrical to the centre of gravity easily and inexpensively. The system offers a locking in 15° steps with a patented spring bolt. Basic Version This minimum configuration is designed for rotationally symmetrical components which are screwed on here at the centre of gravity and can thus be rotated with little force.  Its particularly simple operation allows it to be used economically even by untrained personnel, both in small and medium batch production. The axis of rotation is bolted to the base frame, height adjustable for higher components. Optional with hydraulic, vertical lift (see other TurnMan variants) incl. wheel set mounted (2x brake/steering roller, 1x rigid)   Technical data Payload 300 kg lowest Loading height 600 mm Height axis of rotation 725-900 mm Overall height 1,360-1585 mm Occupational safety A sample operating manual can be found in the tab PDF here in the article or here . You should adapt these to your company. Please contact us to receive an editable Word template.

€6,076.14*

Net price: €5,106.00

TurnMan 300 - with support table, lifting gear and turntable
003.5.730
Drehteller: mit Drehteller
The TurnMan rotary welding table is designed for low-force turning tasks on components up to 300 kg load capacity as a "one-man" activity.  This welding turntable is a very slim, rational positioner with an excellent price-performance ratio, can be used variably for welding and assembly work and offers a lot of foot space for more ergonomics at the workplace.The concept of the rotary welding table is based on the property that non-rotationally symmetrical components on the rotary table can be brought to the respective centre of gravity by means of a hand crank and can thus be turned into the respective position quickly and easily with little force. The system offers locking in 15° steps with a patented spring bolt. Once the centre of gravity  has been defined by the workpiece, the working height of the  support table is determined using a setting table supplied and the system is brought into position and adjusted along a measuring ruler using only a single spindle stroke axis.  Its particularly simple operation allows even untrained personnel to use it economically as a manipulator for turning and turning components, both in small and medium series production. The rotation axis is bolted to the base frame, height adjustable for higher components up to a load capacity of 300kg. Optionally available with hydraulic, vertical lift as "Turnman Lift incl. wheel set mounted (2x brake/steering roller, 1x rigid) You can easily change between the delivered table and one of your fixtures by inserting it comfortably into the keyholes using the suspension bolts and then just fixing it (see picture). Options / Customization Individual lacquering on request Table extension (only possible without turntable) Technical data Payload 300 kg lowest Loading height 600 mm Useful stroke 430 mm Height axis of rotation 725-900 mm Table size 1,000 x 400 mm Overall height 1,360-1585 mm   Occupational safety A sample operating manual can be found in the tab PDF here in the article or here . You should adapt these to your company. Please contact us to receive an editable Word template.

Variants from €6,067.81*
€6,232.03*

Net price: €5,237.00

TurnMan 300 - with support table, lifting gear and turntable
003.5.746
The TurnMan rotary welding table is designed for low-force turning tasks on components up to 300 kg load capacity as a "one-man" activity.  This welding turntable is a very slim, rational positioner with an excellent price-performance ratio, can be used variably for welding and assembly work and offers a lot of foot space for more ergonomics at the workplace.The concept of the rotary welding table is based on the property that non-rotationally symmetrical components on the rotary table can be brought to the respective centre of gravity by means of a hand crank and can thus be turned into the respective position quickly and easily with little force. The system offers locking in 15° steps with a patented spring bolt. Once the centre of gravity  has been defined by the workpiece, the working height of the  support table is determined using a setting table supplied and the system is brought into position and adjusted along a measuring ruler using only a single spindle stroke axis.  Its particularly simple operation allows even untrained personnel to use it economically as a manipulator for turning and turning components, both in small and medium series production. The rotation axis is bolted to the base frame, height adjustable for higher components up to a load capacity of 300kg. Optionally available with hydraulic, vertical lift as "Turnman Lift incl. wheel set mounted (2x brake/steering roller, 1x rigid) You can easily change between the delivered table and one of your fixtures by inserting it comfortably into the keyholes using the suspension bolts and then just fixing it (see picture). Options / Customization Individual lacquering on request Table extension (only possible without turntable) Technical data Payload 300 kg lowest Loading height 600 mm Useful stroke 430 mm Height axis of rotation 725-900 mm Table size 1,000 x 400 mm Overall height 1,360-1585 mm   Occupational safety A sample operating manual can be found in the tab PDF here in the article or here . You should adapt these to your company. Please contact us to receive an editable Word template.

€7,735.00*

Net price: €6,500.00

TurnMan Lift 300
003.5.736
Drehteller: mit Drehteller
Le TurnMan Lift est le perfectionnement constant de notre tourneur de soudure TurnMan. Un tourneur rotatif moderne et rationnel pour vos tâches de soudage, d'assemblage ou d'assurance qualité. Tournez et retournez manuellement et facilement des composants jusqu'à 300 kg. Vous n'avez plus besoin d'investissements coûteux pour placer vos composants rapidement, efficacement et en toute sécurité dans la bonne position. Le verrouillage à ressort breveté vous permet de tourner votre composant par pas de 15° dans plusieurs axes. Au moyen d'une manivelle, vous pouvez facilement et rapidement ajuster  le centre de gravité de votre composant, puis le tourner aussi légèrement qu'une plume. Vous pouvez ensuite utiliser l'unité de levage intégrée pour régler confortablement la hauteur du composant à l'aide de la télécommande manuelle, afin d'obtenir une ergonomie et une accessibilité idéales pour votre composant. La course permet un réglage en hauteur de 400 mm. 3 axes : 1. axe pour la rotation du composant à l'horizontale, 2. axe pour la rotation sur la table, 3. axe comme réglage de la hauteur. Capacité de charge 300 kg hauteur de levage 400 mm Doit être vissé dans le sol. Au choix avec plateau tournant ou uniquement comme table d'appui (actuellement sans illustration) Peinture individuelle sur demande. Pour la fonctionnalité, nous vous recommandons notre vidéo YouTube que vous pouvez visionner en deuxième position sur les images ci-dessus. Sécurité industrielle Un exemple de manuel d'utilisation se trouve dans l'onglet PDF ici dans l'article ou ici . Vous devez les adapter à votre entreprise. Veuillez nous contacter pour recevoir un modèle Word modifiable.

Variants from €12,727.05*
€13,060.25*

Net price: €10,975.00