Tool holder for 1/4" sockets

Tool holder for 1/2'' sockets for 10 sockets SW 10,11,12,13, 17, 19, 22, 24, 27, 30 Housing: stainless steel The K.Lean tool holder for 1/2'' sockets is supplied unloaded. length of the holder: 355mm

Tool holder for 1/4'' bits for a total of 18 bits Slot: 4.5; 5.5; 6.5; 8 Cross slot: PH + PZ each 1; 2; 3 Torx: 8; 10; 15; 20; 25; 27; 30; 35 Hexagon socket Stainless steel housing The K.Lean tool holder is supplied unloaded. length of the holder: 355mm

Tool holder for drills for drill sizes 1-13 mm single row arrangement with 0.5 mm pitch Stainless steel housing The K.Lean tool holder for drills is supplied unfitted. Wide range of applications Accessories for our tool stand Kit Accessories for our sidewall workbench can also be screwed to any wall or freely placeable on the workbench length of the holder: 355mm

Manufactured as angle bracket for universal mounting on the tool trolley. The angle grinder is hooked into the shaped pocket. Optionally you can get a screw-on cable hook to clean up cable-operated angle grinders. Dimensions: 162 x 140 x 60 mm

The TurnMan rotary welding table is designed for low-force turning tasks on components up to 300 kg load capacity as a "one-man" activity.  This welding turntable is a very slim, rational positioner with an excellent price-performance ratio, can be used variably for welding and assembly work and offers a lot of foot space for more ergonomics at the workplace.The concept of the rotary welding table is based on the property that non-rotationally symmetrical components on the rotary table can be brought to the respective centre of gravity by means of a hand crank and can thus be turned into the respective position quickly and easily with little force. The system offers locking in 15° steps with a patented spring bolt. Once the centre of gravity  has been defined by the workpiece, the working height of the  support table is determined using a setting table supplied and the system is brought into position and adjusted along a measuring ruler using only a single spindle stroke axis.  Its particularly simple operation allows even untrained personnel to use it economically as a manipulator for turning and turning components, both in small and medium series production. The rotation axis is bolted to the base frame, height adjustable for higher components up to a load capacity of 300kg. Optionally available with hydraulic, vertical lift as "Turnman Lift incl. wheel set mounted (2x brake/steering roller, 1x rigid) You can easily change between the delivered table and one of your fixtures by inserting it comfortably into the keyholes using the suspension bolts and then just fixing it (see picture). Options / Customization Individual lacquering on request Table extension (only possible without turntable) Technical data Payload 300 kg lowest Loading height 600 mm Useful stroke 430 mm Height axis of rotation 725-900 mm Table size 1,000 x 400 mm Overall height 1,360-1585 mm   Occupational safety A sample operating manual can be found in the tab PDF here in the article or here . You should adapt these to your company. Please contact us to receive an editable Word template.