Tool holder for 1/4" sockets


Net price: €49.90

Are you a wholesale customer, retailer, etc., and want a custom quote? Feel free to inquire.

Product number: 003.5.555
Product information "Tool holder for 1/4" sockets"

Tool holder for 1/4'' sockets and 1/4'' bits

  • for 11 sockets
    :SW 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13
  • for 7 bits, hexagon socket
    :SW 2.5; 3; 3.5; 4; 5; 6; 8
  • Stainless steel housing

The K.Lean tool holder for 1/4'' sockets is supplied unfitted.

length of the holder: 355mm

Ähnliche Artikel

Universal tool holder, magnetic
The universal tool holder can hold the following tools: Screwdriver Open-end spanner, open-end box wrench pliers, scissors etc. all bar-like tools with round or polygonal cross-sections Measuring equipment and other tools. With a magnetic holding force of two times 20 N per holder it is the universal talent among tool holders.  The variable concept of the universal tool holder makes unused special holders from set offers a thing of the past: The tool holder adapts to the requirements of the workplace. If required, it can be clipped onto the universal clamping rail with a single movement! Completely without tools and without further securing! It can be removed just as quickly. Horizontally, the holder can be moved continuously on the clamping rail. The lateral stop bar ensures vertical alignment of the tool. The stop is set to the right, left, double-sided or passive by simply changing the position.The tool is located 30 mm away from the rear edge of the holding rail. This allows quick and easy access to the tool and its return. Minimum purchase: 25 pieces


Net price: €97.50

Porte-clef à angle
L'alignementuniforme, sans torsion des clés angulaires permet un changement rapide des outils et un meilleur ordre sur le lieu de travail. Les clés angulaires sont rapidement et facilement alignées par le verrouillage hexagonal inférieur des supports. Les découpes sont faites avec un dégagement suffisant pour assurer un accès rapide sans basculement. L'étiquetage donne un aperçu rapide des tailles disponibles. Pour onze clefs angulaires dans les taillesSW 1,5 | 2 | 2,5 | 3 | 4 | 5 | 6 | 8 | 10 Le support de clé à angle élevé (003.4.151) est particulièrement adapté aux clés à angle avec tête sphérique. Le support de clé à angle bas (003.4.094) est conçu pour les clés à angle court. Les supports de clés angulaires sont fixés à la glissière inférieure du rail de serrage universel à l'aide de deux écrous coulissants et de deux vis moletées (fournies) ou peuvent être placés individuellement sur la table.


Net price: €17.00

Quiver for cordless screwdriver
With this quiver you create a storage possibility for your screwdrivers directly at the place of use. This way you have integrated the most important tools directly into your work process. In addition, the workplace is free and tidy while you do not need the tools. You can place the screwdriver quiver directly in position to ensure quick and ergonomic access. This tool holder is especially designed for assembly lines, production lines, cycle workstations and 5S workbenches. For screwdrivers, cordless screwdrivers, electric screwdrivers, torque screwdrivers, pistol screwdrivers, impulse screwdrivers, compressed air screwdrivers, electric rod screwdrivers or any other tool. Made of solid sheet steel and plastic  Protects the tool from damage Ensures free and tidy work area Large O-ring, as anti-slip protection for cordless screwdrivers with tools. Stable, suitable for workshops D = 54 - 52 mm Adjustable in three dimensions height: 30mm


Net price: €54.90

Quiver holder D13
Screwdrivers and similar tools with a diameter of less than 13 mm are quickly and ergonomically accessible via the quiver holder.The holder is an alternative for tools without iron components, which do not stick to the magnetic universal tool holder.The quiver holder is fixed with a sliding nut and a knurled screw (included in the scope of delivery) is attached to the lower link of the universal clamping rail.


Net price: €18.40

Tool holder for 1/2" sockets
Tool holder for 1/2'' sockets for 10 sockets SW 10,11,12,13, 17, 19, 22, 24, 27, 30 Housing: stainless steel The K.Lean tool holder for 1/2'' sockets is supplied unloaded. length of the holder: 355mm


Net price: €42.80

Customers also viewed

Tool holder for 1/2" sockets
Tool holder for 1/2'' sockets for 10 sockets SW 10,11,12,13, 17, 19, 22, 24, 27, 30 Housing: stainless steel The K.Lean tool holder for 1/2'' sockets is supplied unloaded. length of the holder: 355mm


Net price: €42.80

Tool holder for 1/4" bits
Tool holder for 1/4'' bits for a total of 18 bits Slot: 4.5; 5.5; 6.5; 8 Cross slot: PH + PZ each 1; 2; 3 Torx: 8; 10; 15; 20; 25; 27; 30; 35 Hexagon socket Stainless steel housing The K.Lean tool holder is supplied unloaded. length of the holder: 355mm


Net price: €45.60

Tool holder for drills
Tool holder for drills for drill sizes 1-13 mm single row arrangement with 0.5 mm pitch Stainless steel housing The K.Lean tool holder for drills is supplied unfitted. Wide range of applications Accessories for our tool stand Kit Accessories for our sidewall workbench can also be screwed to any wall or freely placeable on the workbench length of the holder: 355mm


Net price: €39.40

Tool holder for angle grinder (D 125 mm)
Manufactured as angle bracket for universal mounting on the tool trolley. The angle grinder is hooked into the shaped pocket. Optionally you can get a screw-on cable hook to clean up cable-operated angle grinders. Dimensions: 162 x 140 x 60 mm

Variants from €24.63*

Net price: €38.40

TurnMan 300 - with support table, lifting gear and turntable
The TurnMan rotary welding table is designed for low-force turning tasks on components up to 300 kg load capacity as a "one-man" activity.  This welding turntable is a very slim, rational positioner with an excellent price-performance ratio, can be used variably for welding and assembly work and offers a lot of foot space for more ergonomics at the workplace.The concept of the rotary welding table is based on the property that non-rotationally symmetrical components on the rotary table can be brought to the respective centre of gravity by means of a hand crank and can thus be turned into the respective position quickly and easily with little force. The system offers locking in 15° steps with a patented spring bolt. Once the centre of gravity  has been defined by the workpiece, the working height of the  support table is determined using a setting table supplied and the system is brought into position and adjusted along a measuring ruler using only a single spindle stroke axis.  Its particularly simple operation allows even untrained personnel to use it economically as a manipulator for turning and turning components, both in small and medium series production. The rotation axis is bolted to the base frame, height adjustable for higher components up to a load capacity of 300kg. Optionally available with hydraulic, vertical lift as "Turnman Lift incl. wheel set mounted (2x brake/steering roller, 1x rigid) You can easily change between the delivered table and one of your fixtures by inserting it comfortably into the keyholes using the suspension bolts and then just fixing it (see picture). Options / Customization Individual lacquering on request Table extension (only possible without turntable) Technical data Payload 300 kg lowest Loading height 600 mm Useful stroke 430 mm Height axis of rotation 725-900 mm Table size 1,000 x 400 mm Overall height 1,360-1585 mm   Occupational safety A sample operating manual can be found in the tab PDF here in the article or here . You should adapt these to your company. Please contact us to receive an editable Word template.

Variants from €6,067.81*

Net price: €5,237.00