Home

5S Universal Tool Fasteners

5S Universal Tool Fasteners

The 5S concept provides for workplaces where only the tools necessary for the work step are available. The tools require a clearly assigned space. The workplaces must always be kept tidy and clean so that material and tools can be accessed quickly

Only a system that is easy to use will help to increase efficiency and employee satisfaction.

The K.Lean offers a unique comfort of use and is at the same time variably configurable.

Workstations must be adapted to the work steps. If these steps change, the workstation changes. In the past, this led to a growing mountain of unused special holders.

The universal tool holders and tool holders of the K.Lean can be used variably for a large number of different tools thanks to their universal design. Each part can be ordered individually.

Tool holder

Flexible
Universally applicable
few holders for many applications
free access space without injuring the knuckles on a wall

The basic element of most of the innovative tool holders from K.Lean is the K.Lean universal clamping rail. This universal clamping rail based on an aluminium profile allows you to use a variety of different holders to find the right place for your tool.

Based on this, we then offer you various holders for tools. However, with the universal tool holder we can already handle a wide range of applications with a single magnetic holder.

However, you will also find tool holders for sockets, hammers, bits, etc. which are suitable for the universal clamping rail and can be mounted as desired.

With brackets and angle brackets you can also use the K.Lean universal clamping rail flexibly and mount it anywhere

Tool Shadow

Locating bolt for sockets 1/4'' with sliding nut M4

003.4.083

Locating bolt for sockets 1⁄4" for slide nut M4 Dimensions: 6.3 - M4 mm Minimum purchase: 25 pieces

€3.57*

Net price: €3.00

Werkzeughalter für Bits und Stecknüsse 1/4"

Locating pin for sockets 1/4" bits

003.4.084

Mounting bolts for sockets and 1⁄4" bits on the K.Lean universal clamping rail. Fastening by means of a sliding nut in the rail. Dimensions: 10 x M4 mm Minimum purchase: 25 pieces

€3.69*

Net price: €3.10

Locating pin for sockets 3/8''

003.4.084-1

Locating bolt for sockets 3/8" for sliding nut M4 for fixing to the universal clamping rail. Fastening by means of sliding nut. Dimensions: 9.5 - M4 mm Minimum purchase: 25 pieces

€3.75*

Net price: €3.15

Step bolt for hanging up larger tools

003.5.158

Step bolt for hanging up larger tools with sliding nut M5. Dimensions: 12/8 x 32 mm M5 Minimum purchase: 25 pieces

€4.58*

Net price: €3.85

Locating pin for sockets 1/2''

003.4.085

Locating bolt for sockets 1/2" for sliding nut M4 for fixing to the universal clamping rail. Fastening by means of slide nut in the rail. Dimensions: 9.5 - M4 mm Minimum purchase: 25 pieces

€4.58*

Net price: €3.85

Equerre de fixation

003.4.553

Équerre pratique pour la fixation du rail de serrage universel K.Lean, qui permet d'élargir les possibilités de fixation des outils au poste de travail conformément aux directives 5S. Il suffit de visser l'équerre sur votre établi, votre chariot à outils ou votre mur 5S Shadow et de l'enfiler dans le rail de serrage universel K.Lean en aluminium à l'avant. Cela vous permet de fixer le rail de serrage en aluminium facilement et sans problème.

€6.66*

Net price: €5.60

Universal tool holder, non-magnetic

003.4.721

Verstellbereich: 0-10 mm

A tool holder whose clamping force can be perfectly adjusted was the wish of our customers. We have fulfilled this request and developed this intelligent tool holder. By means of the adjusting screws you can ideally adjust the width and pretension of the tool clamping range. This guarantees maximum efficiency and ergonomics. Available sizes (adjustment ranges): 0-10 mm 11-30 mm Currently only available on request.

€8.15*

Net price: €6.85

Ombre à outils Clé à molette

SW10050

de différentes tailles, cette ombre à outils pour clés à boîte ouverte est destinée à visualiser l'espace de rangement attribué à vos outils. Dans le cadre du principe des 5S, les ombres à outils constituent une partie importante de la mise en œuvre de la normalisation. Facile à fixer à l'arrière du rail de serrage universel K.Lean.

€8.21*

Net price: €6.90

Ombre d'outil Couteau à découper

SW10049

€8.21*

Net price: €6.90

Wickelhaken Vertikal verschraubt für das Aufrollen von Kabeln

Cable winding hook screwed horizontally

003.4.841

Ausrichtung: Horizontal

Cable hook for rough workshop use for looping cables and ropes of all kinds. Horizontal mounting. Dimensions: L100 x W30 x H52mm Weight: about 60g / piece Powder-coated Nova gray

€9.64*

Net price: €8.10

Holder for spray cans and bottles

003.4.393

max. Dosendurchmesser: 75 mm

Universally applicable holder for spray cans, bottles, plastic sleeves for cable ties etc. to the 5S workplace, the cleaning station or as an accessory to the workshop trolley. This tool holder is prepared for mounting on the K.Lean universal clamping rail. However, it can also be mounted on any wall, machine or workbench. The spray can is simply inserted from above. The lower plate of the holder carries the spray cans while the upper plate keeps the cans stable. This makes the can holder also suitable for vibrations and movements. The lower flange of the holder is provided with holes for screwing Ergonomic and fast access Made of 2 mm thick stainless steel sheet Opening dimension either D=75 mm or D=65 mm Quick access for spraying cleaning agents, spray cans with penetrating oil on the workshop trolley or the machine. Can be ideally combined with the K.Lean plastic sleeve (only with D=75 mm), e.g. to store cable ties. Plastic sleeve and spray can not included in the scope of delivery. Dimensions (only with D=75 mm):D= 65 mm (D x W x H): 79 x 85 x 125 mm D= 75 mm (D x W x H): 94 x 100 x 152 mm

Variants from €15.05*

€16.07*

Net price: €13.50

Phillips screw for universal clamping rail - length 12 mm

003.4.501

Gewinde: M4

Phillips screw for fastening the universal terminal strip at the front. Thread length: 12 mm Sold in packs of 100.

€16.18*

Net price: €13.60

Phillips screw for universal clamping rail - length 8 mm

003.4.500

Gewinde: M4

Phillips screw for fastening the universal terminal strip at the front. Sold in packs of 100.

€16.18*

Net price: €13.60

Pencil cup

003.5.496

Practical little helper, can be attached to all magnetic surfaces. With two magnets, adheres strongly to ferritic surfaces, plastic tube with round base, suitable for all pen types, from 0 - 17 mm diameter, colour grey. Dimensions: W x H x D 32 x 110 x 50 mm

€16.30*

Net price: €13.70

Set angle bracket

003.5.553

The angle bracket allows the universal clamping rail to be fixed to the wall for tool spacing and allows the rail to be positioned at the desired angle for ergonomic tool handling. The angle is infinitely adjustable. 2 pcs. angle bracket (003.4.553) 2 pcs. thread furrow- de screw M 6 x 16 (003.4.665) 4 oval head screw M 6 x 12 (003.4.515) 4 pcs. locking tooth nut M 6 (003.4.525) Material: stainless steel Distance from the middle of the rail to the wall: 24 mm Attention: The universal clamping rail is not included in this set! You can buy it in your desired length.

€16.42*

Net price: €13.80

Capuchon d'extrémité pour rail de serrage universel

003.4.161

Capuchon d'extrémité profilé pour éviter les blessures sur les extrémités de rails exposées et à arêtes vives. Taille 30x20x3 Prix par unité d'emballage de 20 pièces.

€17.14*

Net price: €14.40

magnetic handle as character holder

003.5.641

Practical aid for attaching drawings and other information to the machine or a metallic workpiece. With two magnets, strongly adhering to ferritic surfaces. Attaches drawings, parts lists or the like can be attached and removed with one grip. Dimensions: W x H x D 180 x 24 x 33 mm

€17.37*

Net price: €14.60

Kunststoffhülse für Aufbewahrung von Kabelbindern und Flaschen

Pipe sleeve for cable ties

003.4.790

Höhe: 125 mm

Plastic sleeve with base e.g. for storing and providing cable ties, cans, bottles, tools, etc. With this practical plastic tube, in combination with our holder for spray cans, you can create a very individual solution for storing your tools and work equipment. Through the bottom nothing can leak, fall out or get away. Due to the different heights you can adapt your assembly trolley or workstation to your needs. Outside diameter = 75mm available sleeve heights: 125 mm / 200 mm / 250 mm Scope of delivery: Plastic sleeve with base - WITHOUT stainless steel holder. ATTENTION: The holder (with D = 75 mm) must be ordered separately

€18.09*

Net price: €15.20

Tool holder for torque wrench

003.5.848

Professional holder, developed for variable tool use, fast and safe handling: Simply hook it in and touch the magnetic holder. Manufactured from stainless steel sheet. Dimensions HxDxW 65 x 60 x30 mm

€18.45*

Net price: €15.50

Adjustable bottle holder

003.4.133

Bottle holder to extend the mobile and stationary K.Lean stations. adjustable to cover different bottle diameters Ø76-Ø93 possible. Suitable for 1,5L PET bottle for cleaning agents, cleaning emulsions, etc. suitable for K.Lean Station 460 and 980

€19.75*

Net price: €16.60

Porte-clef à angle

003.5.151

Ausführung: hoch

L'alignementuniforme, sans torsion des clés angulaires permet un changement rapide des outils et un meilleur ordre sur le lieu de travail. Les clés angulaires sont rapidement et facilement alignées par le verrouillage hexagonal inférieur des supports. Les découpes sont faites avec un dégagement suffisant pour assurer un accès rapide sans basculement. L'étiquetage donne un aperçu rapide des tailles disponibles. Pour onze clefs angulaires dans les taillesSW 1,5 | 2 | 2,5 | 3 | 4 | 5 | 6 | 8 | 10 Le support de clé à angle élevé (003.4.151) est particulièrement adapté aux clés à angle avec tête sphérique. Le support de clé à angle bas (003.4.094) est conçu pour les clés à angle court. Les supports de clés angulaires sont fixés à la glissière inférieure du rail de serrage universel à l'aide de deux écrous coulissants et de deux vis moletées (fournies) ou peuvent être placés individuellement sur la table.

€20.23*

Net price: €17.00

Quiver holder D13

003.5.150

Screwdrivers and similar tools with a diameter of less than 13 mm are quickly and ergonomically accessible via the quiver holder.The holder is an alternative for tools without iron components, which do not stick to the magnetic universal tool holder.The quiver holder is fixed with a sliding nut and a knurled screw (included in the scope of delivery) is attached to the lower link of the universal clamping rail.

€21.90*

Net price: €18.40

Tool holder for 1.000 g hammer

003.5.846

Stable tool holder for 1,000 g hammer or mitten. Safely encloses the tool to prevent it from falling out. The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Can also be mounted directly on a wall. Manufactured from indestructible stainless steel sheets. Dimensions: 174 x 90 x 30 mm

€22.37*

Net price: €18.80

Tool holder for mittens

003.5.843

The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Manufactured from indestructible stainless steel sheets. Dimensions: 174 x 90 x 30 mm

€23.03*

Net price: €19.35

5S Universal Tool Fasteners

Tool holder

Tool Shadow

Made in Germany

Individual 5S Products

Worldwide Delivery

Secure Payment

5S Universal Tool Fasteners

Tool holder

Tool Shadow

Made in Germany

Individual 5S Products

Worldwide Delivery

Secure Payment

Shipping country outside Germany