Capuchon d'extrémité pour rail de serrage universel

The TurnMan rotary welding table is designed for low-force turning tasks on components up to 300 kg load capacity as a "one-man" activity.  This welding turntable is a very slim, rational positioner with an excellent price-performance ratio, can be used variably for welding and assembly work and offers a lot of foot space for more ergonomics at the workplace.The concept of the rotary welding table is based on the property that non-rotationally symmetrical components on the rotary table can be brought to the respective centre of gravity by means of a hand crank and can thus be turned into the respective position quickly and easily with little force. The system offers locking in 15° steps with a patented spring bolt. Once the centre of gravity  has been defined by the workpiece, the working height of the  support table is determined using a setting table supplied and the system is brought into position and adjusted along a measuring ruler using only a single spindle stroke axis.  Its particularly simple operation allows even untrained personnel to use it economically as a manipulator for turning and turning components, both in small and medium series production. The rotation axis is bolted to the base frame, height adjustable for higher components up to a load capacity of 300kg. Optionally available with hydraulic, vertical lift as "Turnman Lift incl. wheel set mounted (2x brake/steering roller, 1x rigid) You can easily change between the delivered table and one of your fixtures by inserting it comfortably into the keyholes using the suspension bolts and then just fixing it (see picture). Options / Customization Individual lacquering on request Table extension (only possible without turntable) Technical data Payload 300 kg lowest Loading height 600 mm Useful stroke 430 mm Height axis of rotation 725-900 mm Table size 1,000 x 400 mm Overall height 1,360-1585 mm   Occupational safety A sample operating manual can be found in the tab PDF here in the article or here . You should adapt these to your company. Please contact us to receive an editable Word template.

The TurnMan Welding manipulator is designed for low force turning tasks on components up to 300 kg as a "one man" operation.  This welding manipulator is a very slim, rational device with an excellent price-performance ratio, variable applicable for welding and assembly work and offers a lot of foot space.The concept of the welding manipulator is based on the property that non-rotationally symmetrical components are brought to the respective centre of gravity of mass on the lifting unit by means of a hand crank and can thus be turned into the respective position quickly and easily with little force. The system offers locking in 15° steps with a patented spring bolt. Once the centre of gravity  has been defined by the workpiece, the working height of the  support table is determined using a setting table supplied and the system is brought into position and adjusted along a measuring ruler using only a single spindle stroke axis.  Its particularly simple operation allows it to be used economically even by untrained personnel, both in small and medium series production. The rotation axis is screwed into the base frame, height adjustable for higher components. Optionally with hydraulic, vertical stroke (see further TurnMan variants) incl. wheel set mounted (2x brake/steering roller, 1x rigid) Convenient and quick hanging of fixtures via keyholes possible. Simply take over the hole patterns into your jigs and fixtures and then attach them quickly and flexibly to the TurnMan (see picture) Technical data Payload 300 kg lowest Loading height 600 mm Useful stroke 430 mm Height axis of rotation 725-900 mm Overall height 1,360-1585 mm Occupational safety A sample operating manual can be found in the tab PDF here in the article or here . You should adapt these to your company. Please contact us to receive an editable Word template.

Le TurnMan Lift est le perfectionnement constant de notre tourneur de soudure TurnMan. Un tourneur rotatif moderne et rationnel pour vos tâches de soudage, d'assemblage ou d'assurance qualité. Tournez et retournez manuellement et facilement des composants jusqu'à 300 kg. Vous n'avez plus besoin d'investissements coûteux pour placer vos composants rapidement, efficacement et en toute sécurité dans la bonne position. Le verrouillage à ressort breveté vous permet de tourner votre composant par pas de 15° dans plusieurs axes. Au moyen d'une manivelle, vous pouvez facilement et rapidement ajuster  le centre de gravité de votre composant, puis le tourner aussi légèrement qu'une plume. Vous pouvez ensuite utiliser l'unité de levage intégrée pour régler confortablement la hauteur du composant à l'aide de la télécommande manuelle, afin d'obtenir une ergonomie et une accessibilité idéales pour votre composant. La course permet un réglage en hauteur de 400 mm. 3 axes : 1. axe pour la rotation du composant à l'horizontale, 2. axe pour la rotation sur la table, 3. axe comme réglage de la hauteur. Capacité de charge 300 kg hauteur de levage 400 mm Doit être vissé dans le sol. Au choix avec plateau tournant ou uniquement comme table d'appui (actuellement sans illustration) Peinture individuelle sur demande. Pour la fonctionnalité, nous vous recommandons notre vidéo YouTube que vous pouvez visionner en deuxième position sur les images ci-dessus. Sécurité industrielle Un exemple de manuel d'utilisation se trouve dans l'onglet PDF ici dans l'article ou ici . Vous devez les adapter à votre entreprise. Veuillez nous contacter pour recevoir un modèle Word modifiable.

The TurnMan Welding turner is a cost effective alternative to expensive, electric turner to turn parts up to 300 kg with little force in order to improve the accessibility of welds and thus reduce the throughput time. This rotary turner gives you maximum flexibility through short set-up times and fast training of your employees. Adjust your fixtures to the mounting plate so that you can convert the rotary turner to the new component within minutes. The concept of this rotary turner is to turn and set up parts that are symmetrical to the centre of gravity easily and inexpensively. The system offers a locking in 15° steps with a patented spring bolt. Basic Version This minimum configuration is designed for rotationally symmetrical components which are screwed on here at the centre of gravity and can thus be rotated with little force.  Its particularly simple operation allows it to be used economically even by untrained personnel, both in small and medium batch production. The axis of rotation is bolted to the base frame, height adjustable for higher components. Optional with hydraulic, vertical lift (see other TurnMan variants) incl. wheel set mounted (2x brake/steering roller, 1x rigid)   Technical data Payload 300 kg lowest Loading height 600 mm Height axis of rotation 725-900 mm Overall height 1,360-1585 mm Occupational safety A sample operating manual can be found in the tab PDF here in the article or here . You should adapt these to your company. Please contact us to receive an editable Word template.

The angle bracket allows the universal clamping rail to be fixed to the wall for tool spacing and allows the rail to be positioned at the desired angle for ergonomic tool handling. The angle is infinitely adjustable. 2 pcs. angle bracket (003.4.553) 2 pcs. thread furrow- de screw M 6 x 16 (003.4.665) 4 oval head screw M 6 x 12 (003.4.515) 4 pcs. locking tooth nut M 6 (003.4.525) Material: stainless steel Distance from the middle of the rail to the wall: 24 mm Attention: The universal clamping rail is not included in this set! You can buy it in your desired length.