Tool holder for torque wrench

Tool holder for 1/2'' sockets for 10 sockets SW 10,11,12,13, 17, 19, 22, 24, 27, 30 Housing: stainless steel The K.Lean tool holder for 1/2'' sockets is supplied unloaded. length of the holder: 355mm

Professional holder, no more slipping, rattling and falling out when driving with the tool assembly trolley. The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Manufactured from indestructible stainless steel sheets. Adjustable to different sizes. The opening dimension of the holder is designed for a leg width of the stop angle of 20-40 mm.  Dimensions: 174 x 90 x 30 mm

Tool holder for 1/4'' bits for a total of 18 bits Slot: 4.5; 5.5; 6.5; 8 Cross slot: PH + PZ each 1; 2; 3 Torx: 8; 10; 15; 20; 25; 27; 30; 35 Hexagon socket Stainless steel housing The K.Lean tool holder is supplied unloaded. length of the holder: 355mm

The universal tool holder can hold the following tools: Screwdriver Open-end spanner, open-end box wrench pliers, scissors etc. all bar-like tools with round or polygonal cross-sections Measuring equipment and other tools. With a magnetic holding force of two times 20 N per holder it is the universal talent among tool holders.  The variable concept of the universal tool holder makes unused special holders from set offers a thing of the past: The tool holder adapts to the requirements of the workplace. If required, it can be clipped onto the universal clamping rail with a single movement! Completely without tools and without further securing! It can be removed just as quickly. Horizontally, the holder can be moved continuously on the clamping rail. The lateral stop bar ensures vertical alignment of the tool. The stop is set to the right, left, double-sided or passive by simply changing the position.The tool is located 30 mm away from the rear edge of the holding rail. This allows quick and easy access to the tool and its return. Minimum purchase: 25 pieces

The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Manufactured from indestructible stainless steel sheets. Dimensions: 174 x 90 x 30 mm

Stable tool holder for 1,000 g hammer or mitten. Safely encloses the tool to prevent it from falling out.  The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Can also be mounted directly on a wall. Manufactured from indestructible stainless steel sheets. Dimensions: 174 x 90 x 30 mm

Plastic sleeve with base e.g. for storing and providing cable ties, cans, bottles, tools, etc. With this practical plastic tube, in combination with our holder for spray cans, you can create a very individual solution for storing your tools and work equipment. Through the bottom nothing can leak, fall out or get away. Due to the different heights you can adapt your assembly trolley or workstation to your needs. Outside diameter = 75mm available sleeve heights: 125 mm / 200 mm / 250 mm Scope of delivery: Plastic sleeve with base - WITHOUT stainless steel holder.   ATTENTION: The holder (with D = 75 mm) must be ordered separately

The TurnMan Welding turner is a cost effective alternative to expensive, electric turner to turn parts up to 300 kg with little force in order to improve the accessibility of welds and thus reduce the throughput time. This rotary turner gives you maximum flexibility through short set-up times and fast training of your employees. Adjust your fixtures to the mounting plate so that you can convert the rotary turner to the new component within minutes. The concept of this rotary turner is to turn and set up parts that are symmetrical to the centre of gravity easily and inexpensively. The system offers a locking in 15° steps with a patented spring bolt. Basic Version This minimum configuration is designed for rotationally symmetrical components which are screwed on here at the centre of gravity and can thus be rotated with little force.  Its particularly simple operation allows it to be used economically even by untrained personnel, both in small and medium batch production. The axis of rotation is bolted to the base frame, height adjustable for higher components. Optional with hydraulic, vertical lift (see other TurnMan variants) incl. wheel set mounted (2x brake/steering roller, 1x rigid)   Technical data Payload 300 kg lowest Loading height 600 mm Height axis of rotation 725-900 mm Overall height 1,360-1585 mm Occupational safety A sample operating manual can be found in the tab PDF here in the article or here . You should adapt these to your company. Please contact us to receive an editable Word template.

Screwdrivers and similar tools with a diameter of less than 13 mm are quickly and ergonomically accessible via the quiver holder.The holder is an alternative for tools without iron components, which do not stick to the magnetic universal tool holder.The quiver holder is fixed with a sliding nut and a knurled screw (included in the scope of delivery) is attached to the lower link of the universal clamping rail.