Set angle bracket

The distance angle bracket allows the universal clamping rail to be fixed to the wall for an even greater distance between the tool and the wall and allows the rail to be positioned at the desired angle for ergonomic tool handling. The angle can be adjusted as required. 2 pcs. distance angle bracket (003.4.552) 2 pcs. thread furrow- de screw M 6 x 16 (003.4.665) 4 oval head screw M 6 x 12 (003.4.515) 4 pcs. locking tooth nut M 6 (003.4.525) Dimensions: 95 x 70 x 25 x 2 mm Material: stainless steel Distance from the middle of the rail to the wall: 60 / 70 / 80 mm Attention: The universal clamping rail is not included in this set! You can buy it in your desired length.

Plastic sleeve with base e.g. for storing and providing cable ties, cans, bottles, tools, etc. With this practical plastic tube, in combination with our holder for spray cans, you can create a very individual solution for storing your tools and work equipment. Through the bottom nothing can leak, fall out or get away. Due to the different heights you can adapt your assembly trolley or workstation to your needs. Outside diameter = 75mm available sleeve heights: 125 mm / 200 mm / 250 mm Scope of delivery: Plastic sleeve with base - WITHOUT stainless steel holder.   ATTENTION: The holder (with D = 75 mm) must be ordered separately

Phillips screw for fastening the universal terminal strip at the front. Sold in packs of 100.

Phillips screw for fastening the universal terminal strip at the front. Thread length: 12 mm Sold in packs of 100.

Cleaning island, consisting of: Galvanized floor tub as chassis, consisting of two roller-bearing fixed and two swivel castors with brake, D=100mm, elastic "blue wheels", soft castors two lateral support cheeks, made of 2mm thick sheet steel, powder-coated, orange RAL 2004, with push handle. Holder for 6 cleaning devices, holder and cleaning cloth roller with tear-off rail, floor-side base between the side cheeks for 40l waste bins, space for second waste bin with height-adjustable pick-up hooks for fixing the various SULO waste bin types. Large information and equipment carrier board white RAL 9010, labelled with K.Lean Station and shadow illustration for dustpan and hand brush rear storage tray at the station for various utensils with partition wall for additional installations: can/bottle holder etc Equipment carrier upper row of holders on the cleaning island for: flat shovel Holstein shovel or aluminium shovel with round pressed handle shaft (not riveted) and Double holder for 2 room brooms for 400 - 600 mm broom width, to take brooms with different bristle equipment. Lower row of holders on the cleaning island for: ergonomic plug-in holder for 1 dustpan 2 ergonomic plug-in holders for hand brushes with different bristles Paper roll holder with tear-off rail max. width of paper roll 420 mm Parking space for waste bins Parking space with attachment possibility for Sulo plastic waste bins, ww. 35l, 50l or 50 l galvanized sheet steel waste bin Dimensions: W x H x D: 950 x 1,300 x 450 mm Weight: 40,00 kg Delivery includes equipment. Equipped with cleaning set 980-1 one pc. Hallenser aluminium edge shovel, diamond pioneer of IdealSpaten, with pressed handle shaft (not riveted) 2 room brooms 600 mm broom width: 1 with hair mixture for light material,1 with Arenga fibre for heavy material 1 dustpan, pressed sheet steel, galvanized, with wooden handle and rubber lip 2 Ergo hand brushes with cranked handle - for easier handling and more even abrasion1Pcs. with hair mixture for fine sweeping material,1 Pcs. with arena fibre for coarse sweeping material. 1 pc. cleaning cloth roller 2-ply, blue, width 380 mm, 1,000 tears 1 pc. plastic waste bin 40l with double flap 1 pc. optionally 30L or 50L SULO plastic waste bin  or 50L galvanized sheet steel waste bin The only difference between the three available variants is in the type of bin on the right

Universally applicable holder for spray cans, bottles, plastic sleeves for cable ties etc. to the 5S workplace, the cleaning station or as an accessory to the workshop trolley. This tool holder is prepared for mounting on the K.Lean universal clamping rail. However, it can also be mounted on any wall, machine or workbench. The spray can is simply inserted from above. The lower plate of the holder carries the spray cans while the upper plate keeps the cans stable. This makes the can holder also suitable for vibrations and movements. The lower flange of the holder is provided with holes for screwing Ergonomic and fast access Made of 2 mm thick stainless steel sheet Opening dimension either D=75 mm or D=65 mm Quick access for spraying cleaning agents, spray cans with penetrating oil on the workshop trolley or the machine. Can be ideally combined with the K.Lean plastic sleeve (only with D=75 mm), e.g. to store cable ties. Plastic sleeve and spray can not included in the scope of delivery. Dimensions (only with D=75 mm):D= 65 mm (D x W x H): 79 x 85 x 125 mm D= 75 mm (D x W x H): 94 x 100 x 152 mm