Sulo waste bin - 3 versions

Sturdy waste bin that fits perfectly into the holder of the 980-6 K.Lean cleaning station but is also practical to position it on a wall station. So your employees can dispose of the waste they have collected directly on the spot. Choice of plastic or galvanized steel for flammable media With cover and holder Suitable for our mobile and stationary K.Lean Stations The following variants are available: 35 L plastic 50 L plastic 50 L Galvanized steel 

The K.Lean Station 300-3 was developed especially for the warehouse, single workstations, machine tools, garages, household.A 4-part device holder for 3 cleaning devices for easy wall mounting. Made of sheet steel, powder-coated in the colour orange, RAL 2004, information foil white with foil inscription K.Lean. Holder for: hall broom for broom width 400-600mm Hand brush with wooden handle Dustpan (for pressed sheet steel dustpan) Hand brushes can be removed again in a practical, ergonomic and optimal way even in working position.   Mounting with 2 / 4 screw holes d=6,5mm.   Space requirement Width / Height (without devices):   400 mm / 450 mm   Scope of delivery: K.Lean 300-3 Equipment carrier with holders for the above mentioned cleaning equipment broom 600mm wide, mixed hair Hand brush with wooden handle, mixed hair Dustpan (for pressed sheet steel dustpan) Assembly and operating instructions

Sturdy waste bin that fits perfectly into the holder of the 980-6 K.Lean cleaning station but is also practical to position it on a wall station. So your employees can dispose of the waste they have collected directly on the spot. Choice of plastic or galvanized steel for flammable media With cover and holder Suitable for our mobile and stationary K.Lean Stations The following variants are available: 35 L plastic 50 L plastic 50 L Galvanized steel 

Mobile broom station 460-5 for 2 large hall brooms (coarse + fine), 2 Ergo hand brushes (coarse + fine), dustpan and paper roll with waste bin for  Standing on wheels, this cleaning station is a practical all-rounder for 5 cleaning machines. You will find a double broom load to distinguish between fine and coarse sweepings, a practical paper towel dispenser and a shelf for a waste bin integrated. Not only the tool holders are designed for quick access but also the hand brushes are angled in ergonomic K.Lean design to lie ideally in the hand guide. By labelling the K.Lean Station you show your employees and visitors that order and cleanliness at this workplace is very important to you and that you are implementing the 5S guidelines. With this cleaning station you have all the equipment to keep the workplace clean very quickly at hand and avoid long search times and wasted ways. Features: The galvanized floor pan has two fixed and two swivel castors (d=100mm), easy-running blue wheels and is made of 2 mm thick sheet steel for stability and powder-coated in RAL 2004 orange. The blue elastic wheel covering (blue wheels) gives the cleaning station perfect sliding properties. It can therefore be moved very quietly, floor-protecting and vibration-damping. The practical and ergonomic push handle allows you to move the station easily between work areas. Large, white information board, labelled with K.Lean Station, including shadow images of dustpan and hand brushes. Holder for 2 hall brooms for 400 - 600 mm broom width With all K.Lean Stations, all cleaning devices can generally be placed in the same way as they are held in the hand during work. It is no longer necessary to move around! rear storage tray for various utensils Paper roll holder with sharp-edged tear-off bar - max. width of paper roll 400 mm Space for a waste bin (400 x 400 mm) Operating and assembly instructions Equipped with cleaning set 460-5 1 pc. broom 600 mm - mixed hair for fine sweeping 1 pc. broom 600mm - Arenga for coarse sweeping material 1 reinforced dustpan with rubber lip 1 pc. K.Lean Ergo hand brush - horsehair for fine sweeping 1 pc. K.Lean Ergo hand sweeper - Arenga for coarse sweeping 1 pc. cleaning cloth roll, blue, 2-ply, 1,000 tears, 360 m,   1 pc. plastic waste bin "Eco-Top" 40L with folding lid Dimensions: H x W x D  - Weight: (without packaging) without cleaning equipment: 1.800 x 600 x  470 mm - 35 kg with cleaning equipment:  1,980 x 1,010 x 570 mm - 47 kg Assembly instructions The K.Lean Station 460-4, 460-5 and 460-6 are screwed on a one-way pallet 800x620 and delivered stretched with opal foil. For reasons of possible transport damage, the wheels are supplied loose with screws. The holders for the Hallenser edge shovel and hall broom must be screwed over from the transport safe position according to the assembly instructions.

K.Lean Station 500-4 - for 4 cleaning machines made of sheet steel, powder-coated in white RAL 9010. Designed as a large information board, labelled with "K.LeanStation" and a shadow image of the sweeping set (dustpan and hand brush). The screw-on device holders, which are loosely enclosed in the packaging, are made of stainless steel and help the product to look good and durable. Ergonomic holders for dustpan and hand brush. These can be inserted very quickly and Lean next to each other in the working position and can also be optimally removed again. Mounting with 4 screw holes D = 6.5 mm Weight: 5.8 kg Scope of delivery: Device holders on top for edge shovel and hall broom. Flat shovel Holstein shovel or aluminium edge shovel with round pressed shaft (not with riveted shaft) Hall broom for 400-600mm mm broom width Bottom device holders for dustpan and hand brush Dustpan (for pressed sheet steel dustpan) Ergo long handle hand brush 1x flat shovel, Halle aluminium edge shovel, Diamant Pionier size 7 with pressed handle 1x broom 600mm wide, mixed hair, for light sweeping 1x dustpan, sheet steel pressed with wooden handle 1x Ergo long handle hand brush for light sweeping material, mixed hair Assembly and operating instructions