First Aid Station

Health & Safety Station - Central board for first aid, fire protection and emergency information. Expandable with AED. The K.Lean Health & Safety Station is intended as a central board within the production to enable quick access to first aid, fire protection and emergency information. It offers: Stretcher First aid station for quick wound care Emergency plans First-aid display Fire blanket 2 fire extinguishers AED (optional)  The station comes pre-assembled and can be mounted directly by you. It is attached to the wall and supported by the 2 aluminum profiles on the floor. This means that plywood walls or Regips walls can also be used. Optionally possible: AED / defibrillator including wall mount: Here there are several different options, which is why we only offer this as an option and in coordination of your needs. You can also use your own AED stations here. The space for this has been provided. 2 Fire Extinguishers: Firefighting should always be done with at least 2 people if possible. Therefore we have installed 2 fire extinguishers. You can choose whether you want to have powder or CO2 variant. Height x width:  2225mm x 1700 mm Individual inscription: You have a name for your safety campaign? Then let us individualize your Health & Safety Station. Feel free to ask us to apply your own logo to the station.   On request, individual equipment:  Just send us an inquiry with your requirements.  

Health & Safety Station - Central board for first aid, fire protection and emergency information. Expandable with AED. The K.Lean Health & Safety Station is intended as a central board within the production to enable quick access to first aid, fire protection and emergency information. It offers: Stretcher First aid station for quick wound care Emergency plans First-aid display Fire blanket 2 fire extinguishers AED (optional)  The station comes pre-assembled and can be mounted directly by you. It is attached to the wall and supported by the 2 aluminum profiles on the floor. This means that plywood walls or Regips walls can also be used. Optionally possible: AED / defibrillator including wall mount: Here there are several different options, which is why we only offer this as an option and in coordination of your needs. You can also use your own AED stations here. The space for this has been provided. 2 Fire Extinguishers: Firefighting should always be done with at least 2 people if possible. Therefore we have installed 2 fire extinguishers. You can choose whether you want to have powder or CO2 variant. Height x width:  2225mm x 1700 mm Individual inscription: You have a name for your safety campaign? Then let us individualize your Health & Safety Station. Feel free to ask us to apply your own logo to the station.   On request, individual equipment:  Just send us an inquiry with your requirements.  

First-aid station for quick wound treatment of minor workshop, office or construction site injuries. Ideal for mounting on narrow building columns. Therefore takes up very little space in width and can be mounted universally. The first aid station can be clamped around a hall girder either with dowels/screws or alternatively with steel straps, thus finding a place that is quickly accessible for injured persons everywhere. The quick supply through the eye shower in the form of a spray with which you can adjust the intensity of the irrigation yourself is a great advantage in case of eye injuries. With a very special plaster dispenser from AKLA you can easily adjust the length of your plaster yourself. You pull until the desired length is reached and close the lid. The integrated knife in the lid automatically cuts off the patch and closes the lid again to protect the patches from dust and dirt. Protect yourself and your employees and, in accordance with DIN 13157, install sufficient first aid stations in your company to guarantee employees a quick first aid possibility and thus prevent extensive injuries. Basic equipment: Station with stainless steel support plate WxHxD: 300x750x30 mm with swivel-mounted storage console as a cover support for the first-aid kit. Labelling field above the first-aid kit: upper labelling field green, white lettering for signal effect. The names of first aiders, emergency numbers and test intervals can be visibly positioned on it. First-aid box according to DIN 13157 with intelligent design and variable, 5S-compliant compartment division as well as transparent housing, so that the completeness of the contents is directly visible from the outside by the safety officer. The first-aid kit is removable and transportable for first aid for injured persons. First-aid manual in the space-saving compartment behind the first-aid box Ballpoint pen with eyelet and fastening chain, positioned in a stable workshop-suitable spring clip. For entries in the dressing book. Plaster dispenser (green, left in picture) filled with 85 detectable wound dressings, carrier foil/plaster 25 mm wide and 10 m long. Plaster skin-coloured. Due to the cutting mechanism in the lid, no scissors are required and the plaster can be cut to length individually. The system is firmly screwed on and cannot be stolen. Additional equipment of the "full equipment" version  250 ml isotonic wound and eye shower (0.9% NaCl) for the treatment of wounds and eye injuries. Stay sterile until the last drop! Roller plaster dispenser incl. soft-touch plaster. The ideal supplement for the treatment of cuts. Self adhesive soft foam bandage, does not stick to skin, hair or wound. Highly absorbent and latex-free. Plaster is 6 cm wide and 5 m long, cut to length by integrated cutting device on the holder. Additional equipment of the version "ear plugs Dispenser for earplugs including stainless steel holder. Contents: 500 pairs of Moldex earplugs made of soft PU foam. SNR value: 36 dB.

First-aid station for quick wound treatment of minor workshop, office or construction site injuries. Ideal for mounting on narrow building columns. Therefore takes up very little space in width and can be mounted universally. The first aid station can be clamped around a hall girder either with dowels/screws or alternatively with steel straps, thus finding a place that is quickly accessible for injured persons everywhere. The quick supply through the eye shower in the form of a spray with which you can adjust the intensity of the irrigation yourself is a great advantage in case of eye injuries. With a very special plaster dispenser from AKLA you can easily adjust the length of your plaster yourself. You pull until the desired length is reached and close the lid. The integrated knife in the lid automatically cuts off the patch and closes the lid again to protect the patches from dust and dirt. Protect yourself and your employees and, in accordance with DIN 13157, install sufficient first aid stations in your company to guarantee employees a quick first aid possibility and thus prevent extensive injuries. Basic equipment: Station with stainless steel support plate WxHxD: 300x750x30 mm with swivel-mounted storage console as a cover support for the first-aid kit. Labelling field above the first-aid kit: upper labelling field green, white lettering for signal effect. The names of first aiders, emergency numbers and test intervals can be visibly positioned on it. First-aid box according to DIN 13157 with intelligent design and variable, 5S-compliant compartment division as well as transparent housing, so that the completeness of the contents is directly visible from the outside by the safety officer. The first-aid kit is removable and transportable for first aid for injured persons. First-aid manual in the space-saving compartment behind the first-aid box Ballpoint pen with eyelet and fastening chain, positioned in a stable workshop-suitable spring clip. For entries in the dressing book. Plaster dispenser (green, left in picture) filled with 85 detectable wound dressings, carrier foil/plaster 25 mm wide and 10 m long. Plaster skin-coloured. Due to the cutting mechanism in the lid, no scissors are required and the plaster can be cut to length individually. The system is firmly screwed on and cannot be stolen. Additional equipment of the "full equipment" version  250 ml isotonic wound and eye shower (0.9% NaCl) for the treatment of wounds and eye injuries. Stay sterile until the last drop! Roller plaster dispenser incl. soft-touch plaster. The ideal supplement for the treatment of cuts. Self adhesive soft foam bandage, does not stick to skin, hair or wound. Highly absorbent and latex-free. Plaster is 6 cm wide and 5 m long, cut to length by integrated cutting device on the holder. Additional equipment of the version "ear plugs Dispenser for earplugs including stainless steel holder. Contents: 500 pairs of Moldex earplugs made of soft PU foam. SNR value: 36 dB.

Le TurnMan Lift est le perfectionnement constant de notre tourneur de soudure TurnMan. Un tourneur rotatif moderne et rationnel pour vos tâches de soudage, d'assemblage ou d'assurance qualité. Tournez et retournez manuellement et facilement des composants jusqu'à 300 kg. Vous n'avez plus besoin d'investissements coûteux pour placer vos composants rapidement, efficacement et en toute sécurité dans la bonne position. Le verrouillage à ressort breveté vous permet de tourner votre composant par pas de 15° dans plusieurs axes. Au moyen d'une manivelle, vous pouvez facilement et rapidement ajuster  le centre de gravité de votre composant, puis le tourner aussi légèrement qu'une plume. Vous pouvez ensuite utiliser l'unité de levage intégrée pour régler confortablement la hauteur du composant à l'aide de la télécommande manuelle, afin d'obtenir une ergonomie et une accessibilité idéales pour votre composant. La course permet un réglage en hauteur de 400 mm. 3 axes : 1. axe pour la rotation du composant à l'horizontale, 2. axe pour la rotation sur la table, 3. axe comme réglage de la hauteur. Capacité de charge 300 kg hauteur de levage 400 mm Doit être vissé dans le sol. Au choix avec plateau tournant ou uniquement comme table d'appui (actuellement sans illustration) Peinture individuelle sur demande. Pour la fonctionnalité, nous vous recommandons notre vidéo YouTube que vous pouvez visionner en deuxième position sur les images ci-dessus. Sécurité industrielle Un exemple de manuel d'utilisation se trouve dans l'onglet PDF ici dans l'article ou ici . Vous devez les adapter à votre entreprise. Veuillez nous contacter pour recevoir un modèle Word modifiable.

L'alignementuniforme, sans torsion des clés angulaires permet un changement rapide des outils et un meilleur ordre sur le lieu de travail. Les clés angulaires sont rapidement et facilement alignées par le verrouillage hexagonal inférieur des supports. Les découpes sont faites avec un dégagement suffisant pour assurer un accès rapide sans basculement. L'étiquetage donne un aperçu rapide des tailles disponibles. Pour onze clefs angulaires dans les taillesSW 1,5 | 2 | 2,5 | 3 | 4 | 5 | 6 | 8 | 10 Le support de clé à angle élevé (003.4.151) est particulièrement adapté aux clés à angle avec tête sphérique. Le support de clé à angle bas (003.4.094) est conçu pour les clés à angle court. Les supports de clés angulaires sont fixés à la glissière inférieure du rail de serrage universel à l'aide de deux écrous coulissants et de deux vis moletées (fournies) ou peuvent être placés individuellement sur la table.