Holder for spray cans and bottles

Support pratique pour un accès rapide et facile à votre distributeur de ruban adhésif. Posez le distributeur rapidement et facilement. Si vous installez votre station d'emballage, votre établi ou votre lieu de travail conformément aux directives 5S, vous devez utiliser des supports pour assurer un accès rapide et ergonomique à votre distributeur de ruban adhésif et, en même temps, prévoir un espace réservé pour l'appareil conformément aux principes 5S. Vous obtiendrez ainsi un ordre et une propreté à long terme à la table d'emballage. Support 3 en 1 pour distributeur de table : Comme support pour le distributeur de ruban adhésif pour colis sur la table Pour une fixation murale à l'avant Pour un montage à un angle de 90° sur l'établi, la table d'emballage ou le lieu de travail  le dessin intelligent vous pouvez fixer le support de 3 manières différentes, vous pouvez le modifier à tout moment car aucune autre fixation n'est nécessaire. Il suffit d'ouvrir les vis, de tourner le support dans la position souhaitée et de le resserrer. Avantages Un distributeur de ruban adhésif prêt à l'emploi accessible de manière ergonomique crée de l'ordre et de la propreté dans la station d'emballage facilité d'installation Utilisation flexible de vos rubans adhésifs Livraison facultative avec ou sans Distributeur de ruban adhésif. Livraison cependant toujours sans rouleau de ruban adhésif.

The universal tool holder can hold the following tools: Screwdriver Open-end spanner, open-end box wrench pliers, scissors etc. all bar-like tools with round or polygonal cross-sections Measuring equipment and other tools. With a magnetic holding force of two times 20 N per holder it is the universal talent among tool holders.  The variable concept of the universal tool holder makes unused special holders from set offers a thing of the past: The tool holder adapts to the requirements of the workplace. If required, it can be clipped onto the universal clamping rail with a single movement! Completely without tools and without further securing! It can be removed just as quickly. Horizontally, the holder can be moved continuously on the clamping rail. The lateral stop bar ensures vertical alignment of the tool. The stop is set to the right, left, double-sided or passive by simply changing the position.The tool is located 30 mm away from the rear edge of the holding rail. This allows quick and easy access to the tool and its return. Minimum purchase: 25 pieces

Stable tool holder for 1,000 g hammer or mitten. Safely encloses the tool to prevent it from falling out.  The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Can also be mounted directly on a wall. Manufactured from indestructible stainless steel sheets. Dimensions: 174 x 90 x 30 mm

Bottle holder to extend the mobile and stationary K.Lean stations. adjustable to cover different bottle diameters Ø76-Ø93 possible. Suitable for 1,5L PET bottle for cleaning agents, cleaning emulsions, etc. suitable for K.Lean Station 460 and 980

Screwdrivers and similar tools with a diameter of less than 13 mm are quickly and ergonomically accessible via the quiver holder.The holder is an alternative for tools without iron components, which do not stick to the magnetic universal tool holder.The quiver holder is fixed with a sliding nut and a knurled screw (included in the scope of delivery) is attached to the lower link of the universal clamping rail.

The K.Lean tool holders are variably attached to the patented universal clamping rail. The clamping rail is extruded from aluminium profiles and anodised. Together with the separately available tool holders, it offers a unique, linear and flexible organization system. In free-floating use, the clamping rail unfolds its full potential: The system offers access to the tools, transparent workstations and additional depth (which benefits the offset mounting of tool shadows or special holders). The rail's closed top profile prevents coarse soiling. Sliding nut slides are located at the back and at the bottom, which can be used toattach various accessories(special holders, tool shadows). The universal clamping rail is part of the workbench attachments and the mounting trolley. It is available individually and by the metre for individual designs and applications. The clamping rail can be easily attached to walls and other flat surfaces in addition to the floating installation.

Manufactured as angle bracket for universal mounting on the tool trolley. The angle grinder is hooked into the shaped pocket. Optionally you can get a screw-on cable hook to clean up cable-operated angle grinders. Dimensions: 162 x 140 x 60 mm

K.Lean Station 500-4 - for 4 cleaning machines made of sheet steel, powder-coated in white RAL 9010. Designed as a large information board, labelled with "K.LeanStation" and a shadow image of the sweeping set (dustpan and hand brush). The screw-on device holders, which are loosely enclosed in the packaging, are made of stainless steel and help the product to look good and durable. Ergonomic holders for dustpan and hand brush. These can be inserted very quickly and Lean next to each other in the working position and can also be optimally removed again. Mounting with 4 screw holes D = 6.5 mm Weight: 5.8 kg Scope of delivery: Device holders on top for edge shovel and hall broom. Flat shovel Holstein shovel or aluminium edge shovel with round pressed shaft (not with riveted shaft) Hall broom for 400-600mm mm broom width Bottom device holders for dustpan and hand brush Dustpan (for pressed sheet steel dustpan) Ergo long handle hand brush 1x flat shovel, Halle aluminium edge shovel, Diamant Pionier size 7 with pressed handle 1x broom 600mm wide, mixed hair, for light sweeping 1x dustpan, sheet steel pressed with wooden handle 1x Ergo long handle hand brush for light sweeping material, mixed hair Assembly and operating instructions

K.Lean Station 460-4 mobile - The compact, mobile cleaning island The K.Lean Station 460-4 Mobil is a compact and modern cleaning island on wheels to fulfill your cleaning tasks. Placed on wheels, this cleaning station is a practical all-rounder for 4 cleaning machines. Use this modern cleaning station to create and maintain order and cleanliness according to the 5 S principle in your production or storage facility. As a kind of system trolley it combines the practical holders for broom, Hallenser aluminium edge shovel, hand brush and dustpan with a 40 l waste bin for the used paper towels or other waste. This cleaning trolley shows through its decorative lettering with K.Lean Station as well as its printed shadowgraphs for dustpan and hand brush the effect you want to convey to your employees and visitors that cleanliness and order at your workplaces are very important to you and that you are also aware of the 5S guidelines. With this cleaning station you now have all the equipment you need to keep your workplace clean within easy reach and avoid long search times and wasted journeys. Features: The galvanized floor pan has two fixed and two swivel castors (d=100mm), easy-running blue wheels and is made of 2 mm thick sheet steel for stability and powder-coated in RAL 2004 orange. The blue elastic wheel covering (blue wheels) gives the cleaning station perfect sliding properties. It can therefore be moved very quietly, floor-protecting and vibration-damping. A practical and ergonomically shaped push handle allows you to move the station comfortably between work areas. White information board, labelled with K.Lean Station, including shadow images of dustpan and hand brushes. Side panels in "waste collection orange" to create a lighthouse effect in your company ergonomically shaped stainless steel holder for flat shovel, Holsteiner shovel or Hallenser aluminium edge shovel with round pressed handle shaft (not riveted) holder for 2 hall brooms for 400 - 600 mm broom width With all K.Lean Stations, all cleaning devices can generally be placed in the same way as they are held in the hand during work. It is no longer necessary to move around! rear storage tray for various utensils Paper roll holder with sharp-edged tear-off bar - max. width of paper roll 400 mm Space for a waste bin (400 x 400 mm) Operating and assembly instructions Equipped with cleaning set 460-4 one pc. Hallenser aluminium edge shovel size 7 with steam-bent ash handle 1 pc. broom 600 mm - mixed hair for fine sweeping 1 reinforced dustpan with rubber lip 1 pc. K.Lean Ergo hand brush - horsehair for fine sweeping 1 pc. cleaning cloth roll, blue, 2-ply, 1,000 tears, 360 m,   1 pc. plastic waste bin "Eco-Top" 40L with folding lid Dimensions: H x W x D  - Weight: (without packaging) without cleaning equipment: 1.800 x 600 x  470 mm - 36 kg with cleaning equipment:  1,980 x 1,010 x 570 mm - 46 kg Assembly instructions The K.Lean Station 460-4, 460-5 and 460-6 are screwed on a one-way pallet 800x620 and delivered stretched with opal foil. For reasons of possible transport damage, the wheels are supplied loose with screws. The holders for the Hallenser edge shovel and hall broom must be screwed over from the transport safe position according to the assembly instructions.

First-aid station for quick wound treatment of minor workshop, office or construction site injuries. Ideal for mounting on narrow building columns. Therefore takes up very little space in width and can be mounted universally. The first aid station can be clamped around a hall girder either with dowels/screws or alternatively with steel straps, thus finding a place that is quickly accessible for injured persons everywhere. The quick supply through the eye shower in the form of a spray with which you can adjust the intensity of the irrigation yourself is a great advantage in case of eye injuries. With a very special plaster dispenser from AKLA you can easily adjust the length of your plaster yourself. You pull until the desired length is reached and close the lid. The integrated knife in the lid automatically cuts off the patch and closes the lid again to protect the patches from dust and dirt. Protect yourself and your employees and, in accordance with DIN 13157, install sufficient first aid stations in your company to guarantee employees a quick first aid possibility and thus prevent extensive injuries. Basic equipment: Station with stainless steel support plate WxHxD: 300x750x30 mm with swivel-mounted storage console as a cover support for the first-aid kit. Labelling field above the first-aid kit: upper labelling field green, white lettering for signal effect. The names of first aiders, emergency numbers and test intervals can be visibly positioned on it. First-aid box according to DIN 13157 with intelligent design and variable, 5S-compliant compartment division as well as transparent housing, so that the completeness of the contents is directly visible from the outside by the safety officer. The first-aid kit is removable and transportable for first aid for injured persons. First-aid manual in the space-saving compartment behind the first-aid box Ballpoint pen with eyelet and fastening chain, positioned in a stable workshop-suitable spring clip. For entries in the dressing book. Plaster dispenser (green, left in picture) filled with 85 detectable wound dressings, carrier foil/plaster 25 mm wide and 10 m long. Plaster skin-coloured. Due to the cutting mechanism in the lid, no scissors are required and the plaster can be cut to length individually. The system is firmly screwed on and cannot be stolen. Additional equipment of the "full equipment" version  250 ml isotonic wound and eye shower (0.9% NaCl) for the treatment of wounds and eye injuries. Stay sterile until the last drop! Roller plaster dispenser incl. soft-touch plaster. The ideal supplement for the treatment of cuts. Self adhesive soft foam bandage, does not stick to skin, hair or wound. Highly absorbent and latex-free. Plaster is 6 cm wide and 5 m long, cut to length by integrated cutting device on the holder. Additional equipment of the version "ear plugs Dispenser for earplugs including stainless steel holder. Contents: 500 pairs of Moldex earplugs made of soft PU foam. SNR value: 36 dB.