Holder for spray cans and bottles

Support pratique pour un accès rapide et facile à votre distributeur de ruban adhésif. Posez le distributeur rapidement et facilement. Si vous installez votre station d'emballage, votre établi ou votre lieu de travail conformément aux directives 5S, vous devez utiliser des supports pour assurer un accès rapide et ergonomique à votre distributeur de ruban adhésif et, en même temps, prévoir un espace réservé pour l'appareil conformément aux principes 5S. Vous obtiendrez ainsi un ordre et une propreté à long terme à la table d'emballage. Support 3 en 1 pour distributeur de table : Comme support pour le distributeur de ruban adhésif pour colis sur la table Pour une fixation murale à l'avant Pour un montage à un angle de 90° sur l'établi, la table d'emballage ou le lieu de travail  le dessin intelligent vous pouvez fixer le support de 3 manières différentes, vous pouvez le modifier à tout moment car aucune autre fixation n'est nécessaire. Il suffit d'ouvrir les vis, de tourner le support dans la position souhaitée et de le resserrer. Avantages Un distributeur de ruban adhésif prêt à l'emploi accessible de manière ergonomique crée de l'ordre et de la propreté dans la station d'emballage facilité d'installation Utilisation flexible de vos rubans adhésifs Livraison facultative avec ou sans Distributeur de ruban adhésif. Livraison cependant toujours sans rouleau de ruban adhésif.

The universal tool holder can hold the following tools: Screwdriver Open-end spanner, open-end box wrench pliers, scissors etc. all bar-like tools with round or polygonal cross-sections Measuring equipment and other tools. With a magnetic holding force of two times 20 N per holder it is the universal talent among tool holders.  The variable concept of the universal tool holder makes unused special holders from set offers a thing of the past: The tool holder adapts to the requirements of the workplace. If required, it can be clipped onto the universal clamping rail with a single movement! Completely without tools and without further securing! It can be removed just as quickly. Horizontally, the holder can be moved continuously on the clamping rail. The lateral stop bar ensures vertical alignment of the tool. The stop is set to the right, left, double-sided or passive by simply changing the position.The tool is located 30 mm away from the rear edge of the holding rail. This allows quick and easy access to the tool and its return. Minimum purchase: 25 pieces

Stable tool holder for 1,000 g hammer or mitten. Safely encloses the tool to prevent it from falling out.  The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Can also be mounted directly on a wall. Manufactured from indestructible stainless steel sheets. Dimensions: 174 x 90 x 30 mm

Bottle holder to extend the mobile and stationary K.Lean stations. adjustable to cover different bottle diameters Ø76-Ø93 possible. Suitable for 1,5L PET bottle for cleaning agents, cleaning emulsions, etc. suitable for K.Lean Station 460 and 980

Screwdrivers and similar tools with a diameter of less than 13 mm are quickly and ergonomically accessible via the quiver holder.The holder is an alternative for tools without iron components, which do not stick to the magnetic universal tool holder.The quiver holder is fixed with a sliding nut and a knurled screw (included in the scope of delivery) is attached to the lower link of the universal clamping rail.

The mobile workbench height adjustable is particularly suitable for rough and heavy workshop use: as a mobile workbench for various assembly work at different workplaces as a stable transport trolley at the right height for mobile quality assurance or document storage  Mobile workbench Height-adjustable in stable design: made of 3 mm thick, sendzimir galvanised sheet metal 40 mm beech multiplex worktop height adjustable feet which are adjusted and fixed by screws 2 cross braces below (without shelf) 2 heavy fixed castors, 2 heavy swivel/brake castors D = 200, load capacity per castor = 400 kg Dimensions: 1,500 x 650 x 840 mm or optionally 1500 x 750 x 840 Delivery ready assembled

K.Lean Station 460-6 mobile - The luxury liner on wheels The K.Lean Station 460-6 Mobile is the counterpart to the K.Lean Cleaning Station 460-6 Wall mounted. Standing on wheels, this cleaning station is a practical all-rounder for 6 cleaning machines. You will find a double broom load to distinguish between fine and coarse sweepings, a practical paper towel dispenser and a shelf for a waste bin integrated. Not only the tool holders are designed for quick access but also the hand brushes are angled in ergonomic K.Lean design to lie ideally in the hand guide. By labelling the K.Lean Station you show your employees and visitors that order and cleanliness at this workplace is very important to you and that you are implementing the 5S guidelines. With this cleaning station you have all the equipment to keep the workplace clean very quickly at hand and avoid long search times and wasted ways. Features: The galvanized floor pan has two fixed and two swivel castors (d=100mm), easy-running blue wheels and is made of 2 mm thick sheet steel for stability and powder-coated in RAL 2004 orange. The blue elastic wheel covering (blue wheels) gives the cleaning station perfect sliding properties. It can therefore be moved very quietly, floor-protecting and vibration-damping. The practical and ergonomic push handle allows you to move the station easily between work areas. Large, white information board, labelled with K.Lean Station, including shadow images of dustpan and hand brushes. Ergonomically shaped stainless steel holder for flat shovel, Holstein shovel or Hallenser aluminium edge shovel with round pressed handle shaft (not riveted) holder for 2 hall brooms for 400 - 600 mm broom width With all K.Lean Stations, all cleaning devices can generally be placed in the same way as they are held in the hand during work. It is no longer necessary to move around! rear storage tray for various utensils Paper roll holder with sharp-edged tear-off bar - max. width of paper roll 400 mm Space for a waste bin (400 x 400 mm) Operating and assembly instructions Equipped with cleaning set 460-6 one pc. Hallenser aluminium edge shovel size 7 with steam-bent ash handle 1 pc. broom 600 mm - mixed hair for fine sweeping 1 pc. broom 600mm - Arenga for coarse sweeping material 1 reinforced dustpan with rubber lip 1 pc. K.Lean Ergo hand brush - horsehair for fine sweeping 1 pc. K.Lean Ergo hand sweeper - Arenga for coarse sweeping 1 pc. cleaning cloth roll, blue, 2-ply, 1,000 tears, 360 m,   1 pc. plastic waste bin "Eco-Top" 40L with folding lid Dimensions: H x W x D  - Weight: (without packaging) without cleaning equipment: 1.800 x 600 x  470 mm - 35 kg with cleaning equipment:  1,980 x 1,010 x 570 mm - 47 kg Assembly instructions The K.Lean Station 460-4, 460-5 and 460-6 are screwed on a one-way pallet 800x620 and delivered stretched with opal foil. For reasons of possible transport damage, the wheels are supplied loose with screws. The holders for the Hallenser edge shovel and hall broom must be screwed over from the transport safe position according to the assembly instructions.

For use in factory halls, warehouses, individual workstations, machine tools, if no columns and walls allow the cleaning station to be positioned visibly. Execution of the equipment carrier in stainless steel for the most adverse conditions. Station 300-3 with mobile stand Device holders for: hall broom up to 600 mm width Dustpan metal and long handle hand brush Scope of delivery: Heavy steel base plate(400x400x15 mm, weight approx. 18 kg)mobile with swivel castors D= 50 mm coatedgrey stainless steel column 60,3 x 2 mm K.Lean Station 300-3 stainless steel mounted Assembly and operating instructions   Delivery mounted on a pallet including equipment.   Equipped with cleaning set 300-3 1 hall broom, 600mm broom width with horse hair mixture for light sweeping 1 hand brush with horse hair mixture for light sweeping 1 dustpan, sheet steel pressed with wooden handle

With this quiver you create a storage possibility for your screwdrivers directly at the place of use. This way you have integrated the most important tools directly into your work process. In addition, the workplace is free and tidy while you do not need the tools. You can place the screwdriver quiver directly in position to ensure quick and ergonomic access. This tool holder is especially designed for assembly lines, production lines, cycle workstations and 5S workbenches. For screwdrivers, cordless screwdrivers, electric screwdrivers, torque screwdrivers, pistol screwdrivers, impulse screwdrivers, compressed air screwdrivers, electric rod screwdrivers or any other tool. Made of solid sheet steel and plastic  Protects the tool from damage Ensures free and tidy work area Large O-ring, as anti-slip protection for cordless screwdrivers with tools. Stable, suitable for workshops D = 54 - 52 mm Adjustable in three dimensions height: 30mm

A universal broom holder for the wall to hold the sweeping set that belongs to every modern workplace.It has been developed according to 5 S aspects : hanging, working, hanging of the cleaning equipment without having to reach around,so it can be positioned according to ergonomic aspects. Have your broom and dustpan always at hand with this holder and end time consuming searches. 2-piece, consisting of 2mm stainless steel parts. Dimensions: 245 x 76 x 68 mm Weight: 0,4 kg Device pre-assembled. Supplied with cleaning equipment:  1 dustpan with lip 1 long handle hand brush horsehair