Mobile workbench height adjustable

The Mobile Workbench Basic is particularly suitable for rough and heavy workshop use: as a mobile workbench for various assembly work at different workplaces as stable transport trolley for the mobile QA  Mobile workbench Basic in heavy, very stable design: made of 3 mm thick, sendzimir galvanised sheet metal 40 mm beech multiplex worktop 2 cross braces below (without shelf) 2 heavy fixed castors, 2 heavy swivel/brake castors D = 200, load capacity per castor = 400 kg Dimensions: 1,500 x 650 x 840 mm or optionally 1500 x 750 x 840 Delivery ready assembled

First-aid station for quick wound treatment of minor workshop, office or construction site injuries. Ideal for mounting on narrow building columns. Therefore takes up very little space in width and can be mounted universally. The first aid station can be clamped around a hall girder either with dowels/screws or alternatively with steel straps, thus finding a place that is quickly accessible for injured persons everywhere. The quick supply through the eye shower in the form of a spray with which you can adjust the intensity of the irrigation yourself is a great advantage in case of eye injuries. With a very special plaster dispenser from AKLA you can easily adjust the length of your plaster yourself. You pull until the desired length is reached and close the lid. The integrated knife in the lid automatically cuts off the patch and closes the lid again to protect the patches from dust and dirt. Protect yourself and your employees and, in accordance with DIN 13157, install sufficient first aid stations in your company to guarantee employees a quick first aid possibility and thus prevent extensive injuries. Basic equipment: Station with stainless steel support plate WxHxD: 300x750x30 mm with swivel-mounted storage console as a cover support for the first-aid kit. Labelling field above the first-aid kit: upper labelling field green, white lettering for signal effect. The names of first aiders, emergency numbers and test intervals can be visibly positioned on it. First-aid box according to DIN 13157 with intelligent design and variable, 5S-compliant compartment division as well as transparent housing, so that the completeness of the contents is directly visible from the outside by the safety officer. The first-aid kit is removable and transportable for first aid for injured persons. First-aid manual in the space-saving compartment behind the first-aid box Ballpoint pen with eyelet and fastening chain, positioned in a stable workshop-suitable spring clip. For entries in the dressing book. Plaster dispenser (green, left in picture) filled with 85 detectable wound dressings, carrier foil/plaster 25 mm wide and 10 m long. Plaster skin-coloured. Due to the cutting mechanism in the lid, no scissors are required and the plaster can be cut to length individually. The system is firmly screwed on and cannot be stolen. Additional equipment of the "full equipment" version  250 ml isotonic wound and eye shower (0.9% NaCl) for the treatment of wounds and eye injuries. Stay sterile until the last drop! Roller plaster dispenser incl. soft-touch plaster. The ideal supplement for the treatment of cuts. Self adhesive soft foam bandage, does not stick to skin, hair or wound. Highly absorbent and latex-free. Plaster is 6 cm wide and 5 m long, cut to length by integrated cutting device on the holder. Additional equipment of the version "ear plugs Dispenser for earplugs including stainless steel holder. Contents: 500 pairs of Moldex earplugs made of soft PU foam. SNR value: 36 dB.

Universally applicable holder for spray cans, bottles, plastic sleeves for cable ties etc. to the 5S workplace, the cleaning station or as an accessory to the workshop trolley. This tool holder is prepared for mounting on the K.Lean universal clamping rail. However, it can also be mounted on any wall, machine or workbench. The spray can is simply inserted from above. The lower plate of the holder carries the spray cans while the upper plate keeps the cans stable. This makes the can holder also suitable for vibrations and movements. The lower flange of the holder is provided with holes for screwing Ergonomic and fast access Made of 2 mm thick stainless steel sheet Opening dimension either D=75 mm or D=65 mm Quick access for spraying cleaning agents, spray cans with penetrating oil on the workshop trolley or the machine. Can be ideally combined with the K.Lean plastic sleeve (only with D=75 mm), e.g. to store cable ties. Plastic sleeve and spray can not included in the scope of delivery. Dimensions (only with D=75 mm):D= 65 mm (D x W x H): 79 x 85 x 125 mm D= 75 mm (D x W x H): 94 x 100 x 152 mm

The K.Lean tool holders are variably attached to the patented universal clamping rail. The clamping rail is extruded from aluminium profiles and anodised. Together with the separately available tool holders, it offers a unique, linear and flexible organization system. In free-floating use, the clamping rail unfolds its full potential: The system offers access to the tools, transparent workstations and additional depth (which benefits the offset mounting of tool shadows or special holders). The rail's closed top profile prevents coarse soiling. Sliding nut slides are located at the back and at the bottom, which can be used toattach various accessories(special holders, tool shadows). The universal clamping rail is part of the workbench attachments and the mounting trolley. It is available individually and by the metre for individual designs and applications. The clamping rail can be easily attached to walls and other flat surfaces in addition to the floating installation.

For use in factory halls when no columns and walls allow the cleaning station to be positioned visibly. Station 500-4 with mobile stand Device holders for : K.Lean hall broom up to 600 mm width Hallenser aluminium edge shovel diamondpioneer of IDEAL spade size 7 - protective edge Metal dustpan with rubber lip and Ergo long handle Hand brush Scope of delivery: Heavy steel base plate (400x400x15 mm, weight approx. 18 kg) mobile with 4 swivel castors D= 50 mm, 2 of which are lockable. coated grey stainless steel column 60,3 x 2 x 1700mm K.Lean Station 500-4 mounted Equipped with cleaning set 500-4 Set consisting of: Hallenser aluminium edge shovel (003.4.335) Shovel handle (003.4.336) broom with horsehair mixture (003.4.337) a broom handle (003.4.339) one Ergo long handle hand brush fine (003.4.951) one dustpan with lip (003.4.343) Assembly and operating instructions Delivery mounted on a pallet including equipment.