Porte-outil pour cliquet

The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Manufactured from indestructible stainless steel sheets. Dimensions: 174 x 90 x 30 mm

The universal tool holder can hold the following tools: Screwdriver Open-end spanner, open-end box wrench pliers, scissors etc. all bar-like tools with round or polygonal cross-sections Measuring equipment and other tools. With a magnetic holding force of two times 20 N per holder it is the universal talent among tool holders.  The variable concept of the universal tool holder makes unused special holders from set offers a thing of the past: The tool holder adapts to the requirements of the workplace. If required, it can be clipped onto the universal clamping rail with a single movement! Completely without tools and without further securing! It can be removed just as quickly. Horizontally, the holder can be moved continuously on the clamping rail. The lateral stop bar ensures vertical alignment of the tool. The stop is set to the right, left, double-sided or passive by simply changing the position.The tool is located 30 mm away from the rear edge of the holding rail. This allows quick and easy access to the tool and its return. Minimum purchase: 25 pieces

K.Lean Station 460-4 mobile - The compact, mobile cleaning island The K.Lean Station 460-4 Mobil is a compact and modern cleaning island on wheels to fulfill your cleaning tasks. Placed on wheels, this cleaning station is a practical all-rounder for 4 cleaning machines. Use this modern cleaning station to create and maintain order and cleanliness according to the 5 S principle in your production or storage facility. As a kind of system trolley it combines the practical holders for broom, Hallenser aluminium edge shovel, hand brush and dustpan with a 40 l waste bin for the used paper towels or other waste. This cleaning trolley shows through its decorative lettering with K.Lean Station as well as its printed shadowgraphs for dustpan and hand brush the effect you want to convey to your employees and visitors that cleanliness and order at your workplaces are very important to you and that you are also aware of the 5S guidelines. With this cleaning station you now have all the equipment you need to keep your workplace clean within easy reach and avoid long search times and wasted journeys. Features: The galvanized floor pan has two fixed and two swivel castors (d=100mm), easy-running blue wheels and is made of 2 mm thick sheet steel for stability and powder-coated in RAL 2004 orange. The blue elastic wheel covering (blue wheels) gives the cleaning station perfect sliding properties. It can therefore be moved very quietly, floor-protecting and vibration-damping. A practical and ergonomically shaped push handle allows you to move the station comfortably between work areas. White information board, labelled with K.Lean Station, including shadow images of dustpan and hand brushes. Side panels in "waste collection orange" to create a lighthouse effect in your company ergonomically shaped stainless steel holder for flat shovel, Holsteiner shovel or Hallenser aluminium edge shovel with round pressed handle shaft (not riveted) holder for 2 hall brooms for 400 - 600 mm broom width With all K.Lean Stations, all cleaning devices can generally be placed in the same way as they are held in the hand during work. It is no longer necessary to move around! rear storage tray for various utensils Paper roll holder with sharp-edged tear-off bar - max. width of paper roll 400 mm Space for a waste bin (400 x 400 mm) Operating and assembly instructions Equipped with cleaning set 460-4 one pc. Hallenser aluminium edge shovel size 7 with steam-bent ash handle 1 pc. broom 600 mm - mixed hair for fine sweeping 1 reinforced dustpan with rubber lip 1 pc. K.Lean Ergo hand brush - horsehair for fine sweeping 1 pc. cleaning cloth roll, blue, 2-ply, 1,000 tears, 360 m,   1 pc. plastic waste bin "Eco-Top" 40L with folding lid Dimensions: H x W x D  - Weight: (without packaging) without cleaning equipment: 1.800 x 600 x  470 mm - 36 kg with cleaning equipment:  1,980 x 1,010 x 570 mm - 46 kg Assembly instructions The K.Lean Station 460-4, 460-5 and 460-6 are screwed on a one-way pallet 800x620 and delivered stretched with opal foil. For reasons of possible transport damage, the wheels are supplied loose with screws. The holders for the Hallenser edge shovel and hall broom must be screwed over from the transport safe position according to the assembly instructions.

Manufactured as angle bracket for universal mounting on the tool trolley. The angle grinder is hooked into the shaped pocket. Optionally you can get a screw-on cable hook to clean up cable-operated angle grinders. Dimensions: 162 x 140 x 60 mm

The K.Lean tool holders are variably attached to the patented universal clamping rail. The clamping rail is extruded from aluminium profiles and anodised. Together with the separately available tool holders, it offers a unique, linear and flexible organization system. In free-floating use, the clamping rail unfolds its full potential: The system offers access to the tools, transparent workstations and additional depth (which benefits the offset mounting of tool shadows or special holders). The rail's closed top profile prevents coarse soiling. Sliding nut slides are located at the back and at the bottom, which can be used toattach various accessories(special holders, tool shadows). The universal clamping rail is part of the workbench attachments and the mounting trolley. It is available individually and by the metre for individual designs and applications. The clamping rail can be easily attached to walls and other flat surfaces in addition to the floating installation.

The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Manufactured from indestructible stainless steel sheets. Dimensions: 174 x 90 x 30 mm

Stable tool holder for 1,000 g hammer or mitten. Safely encloses the tool to prevent it from falling out.  The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Can also be mounted directly on a wall. Manufactured from indestructible stainless steel sheets. Dimensions: 174 x 90 x 30 mm