Tool holder for angle grinder (D 125 mm)

With this quiver you create a storage possibility for your screwdrivers directly at the place of use. This way you have integrated the most important tools directly into your work process. In addition, the workplace is free and tidy while you do not need the tools. You can place the screwdriver quiver directly in position to ensure quick and ergonomic access. This tool holder is especially designed for assembly lines, production lines, cycle workstations and 5S workbenches. For screwdrivers, cordless screwdrivers, electric screwdrivers, torque screwdrivers, pistol screwdrivers, impulse screwdrivers, compressed air screwdrivers, electric rod screwdrivers or any other tool. Made of solid sheet steel and plastic  Protects the tool from damage Ensures free and tidy work area Large O-ring, as anti-slip protection for cordless screwdrivers with tools. Stable, suitable for workshops D = 54 - 52 mm Adjustable in three dimensions height: 30mm

The universal tool holder can hold the following tools: Screwdriver Open-end spanner, open-end box wrench pliers, scissors etc. all bar-like tools with round or polygonal cross-sections Measuring equipment and other tools. With a magnetic holding force of two times 20 N per holder it is the universal talent among tool holders.  The variable concept of the universal tool holder makes unused special holders from set offers a thing of the past: The tool holder adapts to the requirements of the workplace. If required, it can be clipped onto the universal clamping rail with a single movement! Completely without tools and without further securing! It can be removed just as quickly. Horizontally, the holder can be moved continuously on the clamping rail. The lateral stop bar ensures vertical alignment of the tool. The stop is set to the right, left, double-sided or passive by simply changing the position.The tool is located 30 mm away from the rear edge of the holding rail. This allows quick and easy access to the tool and its return. Minimum purchase: 25 pieces

Screwdrivers and similar tools with a diameter of less than 13 mm are quickly and ergonomically accessible via the quiver holder.The holder is an alternative for tools without iron components, which do not stick to the magnetic universal tool holder.The quiver holder is fixed with a sliding nut and a knurled screw (included in the scope of delivery) is attached to the lower link of the universal clamping rail.

The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Manufactured from indestructible stainless steel sheets. Dimensions: 174 x 90 x 30 mm

Phillips screw for fastening the universal terminal strip at the front. Sold in packs of 100.

L'alignementuniforme, sans torsion des clés angulaires permet un changement rapide des outils et un meilleur ordre sur le lieu de travail. Les clés angulaires sont rapidement et facilement alignées par le verrouillage hexagonal inférieur des supports. Les découpes sont faites avec un dégagement suffisant pour assurer un accès rapide sans basculement. L'étiquetage donne un aperçu rapide des tailles disponibles. Pour onze clefs angulaires dans les taillesSW 1,5 | 2 | 2,5 | 3 | 4 | 5 | 6 | 8 | 10 Le support de clé à angle élevé (003.4.151) est particulièrement adapté aux clés à angle avec tête sphérique. Le support de clé à angle bas (003.4.094) est conçu pour les clés à angle court. Les supports de clés angulaires sont fixés à la glissière inférieure du rail de serrage universel à l'aide de deux écrous coulissants et de deux vis moletées (fournies) ou peuvent être placés individuellement sur la table.

A tool holder whose clamping force can be perfectly adjusted was the wish of our customers. We have fulfilled this request and developed this intelligent tool holder. By means of the adjusting screws you can ideally adjust the width and pretension of the tool clamping range. This guarantees maximum efficiency and ergonomics. Available sizes (adjustment ranges): 0-10 mm 11-30 mm Currently only available on request.

Professional holder, no more slipping, rattling and falling out when driving with the tool assembly trolley. The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Manufactured from indestructible stainless steel sheets. Adjustable to different sizes. The opening dimension of the holder is designed for a leg width of the stop angle of 20-40 mm.  Dimensions: 174 x 90 x 30 mm

Stable tool holder for 1,000 g hammer or mitten. Safely encloses the tool to prevent it from falling out.  The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Can also be mounted directly on a wall. Manufactured from indestructible stainless steel sheets. Dimensions: 174 x 90 x 30 mm

Locating bolt for sockets 1⁄4" for slide nut M4 Dimensions: 6.3 - M4 mm Minimum purchase: 25 pieces

The K.Lean tool holders are variably attached to the patented universal clamping rail. The clamping rail is extruded from aluminium profiles and anodised. Together with the separately available tool holders, it offers a unique, linear and flexible organization system. In free-floating use, the clamping rail unfolds its full potential: The system offers access to the tools, transparent workstations and additional depth (which benefits the offset mounting of tool shadows or special holders). The rail's closed top profile prevents coarse soiling. Sliding nut slides are located at the back and at the bottom, which can be used toattach various accessories(special holders, tool shadows). The universal clamping rail is part of the workbench attachments and the mounting trolley. It is available individually and by the metre for individual designs and applications. The clamping rail can be easily attached to walls and other flat surfaces in addition to the floating installation.

Universally applicable holder for spray cans, bottles, plastic sleeves for cable ties etc. to the 5S workplace, the cleaning station or as an accessory to the workshop trolley. This tool holder is prepared for mounting on the K.Lean universal clamping rail. However, it can also be mounted on any wall, machine or workbench. The spray can is simply inserted from above. The lower plate of the holder carries the spray cans while the upper plate keeps the cans stable. This makes the can holder also suitable for vibrations and movements. The lower flange of the holder is provided with holes for screwing Ergonomic and fast access Made of 2 mm thick stainless steel sheet Opening dimension either D=75 mm or D=65 mm Quick access for spraying cleaning agents, spray cans with penetrating oil on the workshop trolley or the machine. Can be ideally combined with the K.Lean plastic sleeve (only with D=75 mm), e.g. to store cable ties. Plastic sleeve and spray can not included in the scope of delivery. Dimensions (only with D=75 mm):D= 65 mm (D x W x H): 79 x 85 x 125 mm D= 75 mm (D x W x H): 94 x 100 x 152 mm

K.Lean Station 460-4 mobile - The compact, mobile cleaning island The K.Lean Station 460-4 Mobil is a compact and modern cleaning island on wheels to fulfill your cleaning tasks. Placed on wheels, this cleaning station is a practical all-rounder for 4 cleaning machines. Use this modern cleaning station to create and maintain order and cleanliness according to the 5 S principle in your production or storage facility. As a kind of system trolley it combines the practical holders for broom, Hallenser aluminium edge shovel, hand brush and dustpan with a 40 l waste bin for the used paper towels or other waste. This cleaning trolley shows through its decorative lettering with K.Lean Station as well as its printed shadowgraphs for dustpan and hand brush the effect you want to convey to your employees and visitors that cleanliness and order at your workplaces are very important to you and that you are also aware of the 5S guidelines. With this cleaning station you now have all the equipment you need to keep your workplace clean within easy reach and avoid long search times and wasted journeys. Features: The galvanized floor pan has two fixed and two swivel castors (d=100mm), easy-running blue wheels and is made of 2 mm thick sheet steel for stability and powder-coated in RAL 2004 orange. The blue elastic wheel covering (blue wheels) gives the cleaning station perfect sliding properties. It can therefore be moved very quietly, floor-protecting and vibration-damping. A practical and ergonomically shaped push handle allows you to move the station comfortably between work areas. White information board, labelled with K.Lean Station, including shadow images of dustpan and hand brushes. Side panels in "waste collection orange" to create a lighthouse effect in your company ergonomically shaped stainless steel holder for flat shovel, Holsteiner shovel or Hallenser aluminium edge shovel with round pressed handle shaft (not riveted) holder for 2 hall brooms for 400 - 600 mm broom width With all K.Lean Stations, all cleaning devices can generally be placed in the same way as they are held in the hand during work. It is no longer necessary to move around! rear storage tray for various utensils Paper roll holder with sharp-edged tear-off bar - max. width of paper roll 400 mm Space for a waste bin (400 x 400 mm) Operating and assembly instructions Equipped with cleaning set 460-4 one pc. Hallenser aluminium edge shovel size 7 with steam-bent ash handle 1 pc. broom 600 mm - mixed hair for fine sweeping 1 reinforced dustpan with rubber lip 1 pc. K.Lean Ergo hand brush - horsehair for fine sweeping 1 pc. cleaning cloth roll, blue, 2-ply, 1,000 tears, 360 m,   1 pc. plastic waste bin "Eco-Top" 40L with folding lid Dimensions: H x W x D  - Weight: (without packaging) without cleaning equipment: 1.800 x 600 x  470 mm - 36 kg with cleaning equipment:  1,980 x 1,010 x 570 mm - 46 kg Assembly instructions The K.Lean Station 460-4, 460-5 and 460-6 are screwed on a one-way pallet 800x620 and delivered stretched with opal foil. For reasons of possible transport damage, the wheels are supplied loose with screws. The holders for the Hallenser edge shovel and hall broom must be screwed over from the transport safe position according to the assembly instructions.

The K.Lean Station 300-3 was developed especially for the warehouse, single workstations, machine tools, garages, household.A 4-part device holder for 3 cleaning devices for easy wall mounting. Made of sheet steel, powder-coated in the colour orange, RAL 2004, information foil white with foil inscription K.Lean. Holder for: hall broom for broom width 400-600mm Hand brush with wooden handle Dustpan (for pressed sheet steel dustpan) Hand brushes can be removed again in a practical, ergonomic and optimal way even in working position.   Mounting with 2 / 4 screw holes d=6,5mm.   Space requirement Width / Height (without devices):   400 mm / 450 mm   Scope of delivery: K.Lean 300-3 Equipment carrier with holders for the above mentioned cleaning equipment broom 600mm wide, mixed hair Hand brush with wooden handle, mixed hair Dustpan (for pressed sheet steel dustpan) Assembly and operating instructions

Phillips screw for fastening the universal terminal strip at the front. Sold in packs of 100.