Universal tool holder, non-magnetic

€8.15*

Net price: €6.85

Verstellbereich

Are you a wholesale customer, retailer, etc., and want a custom quote? Feel free to inquire.

Product number: 003.4.721
Product information "Universal tool holder, non-magnetic"

A tool holder whose clamping force can be perfectly adjusted was the wish of our customers. We have fulfilled this request and developed this intelligent tool holder. By means of the adjusting screws you can ideally adjust the width and pretension of the tool clamping range.

This guarantees maximum efficiency and ergonomics.

Available sizes (adjustment ranges):

  • 0-10 mm
  • 11-30 mm

Currently only available on request.

Zubehör

Universal clamping rail - fixed length
003.4.166M
The K.Lean tool holders are variably attached to the patented universal clamping rail. The clamping rail is extruded from aluminium profiles and anodised. Together with the separately available tool holders, it offers a unique, linear and flexible organization system. In free-floating use, the clamping rail unfolds its full potential: The system offers access to the tools, transparent workstations and additional depth (which benefits the offset mounting of tool shadows or special holders). The rail's closed top profile prevents coarse soiling. Sliding nut slides are located at the back and at the bottom, which can be used toattach various accessories(special holders, tool shadows). The universal clamping rail is part of the workbench attachments and the mounting trolley. It is available individually and by the metre for individual designs and applications. The clamping rail can be easily attached to walls and other flat surfaces in addition to the floating installation.

Variants from €19.64*
€28.56*

Net price: €24.00

Ähnliche Artikel

Tool holder for mittens
003.5.843
The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Manufactured from indestructible stainless steel sheets. Dimensions: 174 x 90 x 30 mm

€23.03*

Net price: €19.35

Tool holder for angle grinder (D 125 mm)
003.5.710M
Manufactured as angle bracket for universal mounting on the tool trolley. The angle grinder is hooked into the shaped pocket. Optionally you can get a screw-on cable hook to clean up cable-operated angle grinders. Dimensions: 162 x 140 x 60 mm

Variants from €24.63*
€45.70*

Net price: €38.40

Locating bolt for sockets 1/4'' with sliding nut M4
003.4.083
Locating bolt for sockets 1⁄4" for slide nut M4 Dimensions: 6.3 - M4 mm Minimum purchase: 25 pieces

€3.57*

Net price: €3.00

Tool holder for angle and stop angle
003.5.840
Professional holder, no more slipping, rattling and falling out when driving with the tool assembly trolley. The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Manufactured from indestructible stainless steel sheets. Adjustable to different sizes. The opening dimension of the holder is designed for a leg width of the stop angle of 20-40 mm.  Dimensions: 174 x 90 x 30 mm

€40.76*

Net price: €34.25

Tool holder for 1.000 g hammer
003.5.846
Stable tool holder for 1,000 g hammer or mitten. Safely encloses the tool to prevent it from falling out.  The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Can also be mounted directly on a wall. Manufactured from indestructible stainless steel sheets. Dimensions: 174 x 90 x 30 mm

€22.37*

Net price: €18.80

Phillips screw for universal clamping rail - length 8 mm
003.4.500M
Phillips screw for fastening the universal terminal strip at the front. Sold in packs of 100.

€16.18*

Net price: €13.60

Customers also viewed

Universal clamping rail - fixed length
003.4.197
The K.Lean tool holders are variably attached to the patented universal clamping rail. The clamping rail is extruded from aluminium profiles and anodised. Together with the separately available tool holders, it offers a unique, linear and flexible organization system. In free-floating use, the clamping rail unfolds its full potential: The system offers access to the tools, transparent workstations and additional depth (which benefits the offset mounting of tool shadows or special holders). The rail's closed top profile prevents coarse soiling. Sliding nut slides are located at the back and at the bottom, which can be used toattach various accessories(special holders, tool shadows). The universal clamping rail is part of the workbench attachments and the mounting trolley. It is available individually and by the metre for individual designs and applications. The clamping rail can be easily attached to walls and other flat surfaces in addition to the floating installation.

€19.64*

Net price: €16.50

Tool holder for angle grinder (D 125 mm)
003.4.710
Manufactured as angle bracket for universal mounting on the tool trolley. The angle grinder is hooked into the shaped pocket. Optionally you can get a screw-on cable hook to clean up cable-operated angle grinders. Dimensions: 162 x 140 x 60 mm

€24.63*

Net price: €20.70

Phillips screw for universal clamping rail - length 12 mm
003.4.501
Phillips screw for fastening the universal terminal strip at the front. Thread length: 12 mm Sold in packs of 100.

€16.18*

Net price: €13.60

Capuchon d'extrémité pour rail de serrage universel
003.4.161
Capuchon d'extrémité profilé pour éviter les blessures sur les extrémités de rails exposées et à arêtes vives. Taille 30x20x3 Prix par unité d'emballage de 20 pièces.  

€17.14*

Net price: €14.40

Locating pin for sockets 3/8''
003.4.084-1
Locating bolt for sockets 3/8" for sliding nut M4 for fixing to the universal clamping rail. Fastening by means of sliding nut. Dimensions: 9.5 - M4 mm Minimum purchase: 25 pieces

€3.75*

Net price: €3.15