Universal tool holder, non-magnetic

The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Manufactured from indestructible stainless steel sheets. Dimensions: 174 x 90 x 30 mm

Manufactured as angle bracket for universal mounting on the tool trolley. The angle grinder is hooked into the shaped pocket. Optionally you can get a screw-on cable hook to clean up cable-operated angle grinders. Dimensions: 162 x 140 x 60 mm

Locating bolt for sockets 1⁄4" for slide nut M4 Dimensions: 6.3 - M4 mm Minimum purchase: 25 pieces

Professional holder, no more slipping, rattling and falling out when driving with the tool assembly trolley. The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Manufactured from indestructible stainless steel sheets. Adjustable to different sizes. The opening dimension of the holder is designed for a leg width of the stop angle of 20-40 mm.  Dimensions: 174 x 90 x 30 mm

Stable tool holder for 1,000 g hammer or mitten. Safely encloses the tool to prevent it from falling out.  The tool is approx. 30 mm away from the wall and can therefore be positioned easily and precisely. Prepared for mounting on the K.Lean universal clamping rail. Can also be mounted directly on a wall. Manufactured from indestructible stainless steel sheets. Dimensions: 174 x 90 x 30 mm

Phillips screw for fastening the universal terminal strip at the front. Sold in packs of 100.

Manufactured as angle bracket for universal mounting on the tool trolley. The angle grinder is hooked into the shaped pocket. Optionally you can get a screw-on cable hook to clean up cable-operated angle grinders. Dimensions: 162 x 140 x 60 mm

First-aid station for quick wound treatment of minor workshop, office or construction site injuries. Ideal for mounting on narrow building columns. Therefore takes up very little space in width and can be mounted universally. The first aid station can be clamped around a hall girder either with dowels/screws or alternatively with steel straps, thus finding a place that is quickly accessible for injured persons everywhere. The quick supply through the eye shower in the form of a spray with which you can adjust the intensity of the irrigation yourself is a great advantage in case of eye injuries. With a very special plaster dispenser from AKLA you can easily adjust the length of your plaster yourself. You pull until the desired length is reached and close the lid. The integrated knife in the lid automatically cuts off the patch and closes the lid again to protect the patches from dust and dirt. Protect yourself and your employees and, in accordance with DIN 13157, install sufficient first aid stations in your company to guarantee employees a quick first aid possibility and thus prevent extensive injuries. Basic equipment: Station with stainless steel support plate WxHxD: 300x750x30 mm with swivel-mounted storage console as a cover support for the first-aid kit. Labelling field above the first-aid kit: upper labelling field green, white lettering for signal effect. The names of first aiders, emergency numbers and test intervals can be visibly positioned on it. First-aid box according to DIN 13157 with intelligent design and variable, 5S-compliant compartment division as well as transparent housing, so that the completeness of the contents is directly visible from the outside by the safety officer. The first-aid kit is removable and transportable for first aid for injured persons. First-aid manual in the space-saving compartment behind the first-aid box Ballpoint pen with eyelet and fastening chain, positioned in a stable workshop-suitable spring clip. For entries in the dressing book. Plaster dispenser (green, left in picture) filled with 85 detectable wound dressings, carrier foil/plaster 25 mm wide and 10 m long. Plaster skin-coloured. Due to the cutting mechanism in the lid, no scissors are required and the plaster can be cut to length individually. The system is firmly screwed on and cannot be stolen. Additional equipment of the "full equipment" version  250 ml isotonic wound and eye shower (0.9% NaCl) for the treatment of wounds and eye injuries. Stay sterile until the last drop! Roller plaster dispenser incl. soft-touch plaster. The ideal supplement for the treatment of cuts. Self adhesive soft foam bandage, does not stick to skin, hair or wound. Highly absorbent and latex-free. Plaster is 6 cm wide and 5 m long, cut to length by integrated cutting device on the holder. Additional equipment of the version "ear plugs Dispenser for earplugs including stainless steel holder. Contents: 500 pairs of Moldex earplugs made of soft PU foam. SNR value: 36 dB.

K.Lean Station 460-6 mobile - The luxury liner on wheels The K.Lean Station 460-6 Mobile is the counterpart to the K.Lean Cleaning Station 460-6 Wall mounted. Standing on wheels, this cleaning station is a practical all-rounder for 6 cleaning machines. You will find a double broom load to distinguish between fine and coarse sweepings, a practical paper towel dispenser and a shelf for a waste bin integrated. Not only the tool holders are designed for quick access but also the hand brushes are angled in ergonomic K.Lean design to lie ideally in the hand guide. By labelling the K.Lean Station you show your employees and visitors that order and cleanliness at this workplace is very important to you and that you are implementing the 5S guidelines. With this cleaning station you have all the equipment to keep the workplace clean very quickly at hand and avoid long search times and wasted ways. Features: The galvanized floor pan has two fixed and two swivel castors (d=100mm), easy-running blue wheels and is made of 2 mm thick sheet steel for stability and powder-coated in RAL 2004 orange. The blue elastic wheel covering (blue wheels) gives the cleaning station perfect sliding properties. It can therefore be moved very quietly, floor-protecting and vibration-damping. The practical and ergonomic push handle allows you to move the station easily between work areas. Large, white information board, labelled with K.Lean Station, including shadow images of dustpan and hand brushes. Ergonomically shaped stainless steel holder for flat shovel, Holstein shovel or Hallenser aluminium edge shovel with round pressed handle shaft (not riveted) holder for 2 hall brooms for 400 - 600 mm broom width With all K.Lean Stations, all cleaning devices can generally be placed in the same way as they are held in the hand during work. It is no longer necessary to move around! rear storage tray for various utensils Paper roll holder with sharp-edged tear-off bar - max. width of paper roll 400 mm Space for a waste bin (400 x 400 mm) Operating and assembly instructions Equipped with cleaning set 460-6 one pc. Hallenser aluminium edge shovel size 7 with steam-bent ash handle 1 pc. broom 600 mm - mixed hair for fine sweeping 1 pc. broom 600mm - Arenga for coarse sweeping material 1 reinforced dustpan with rubber lip 1 pc. K.Lean Ergo hand brush - horsehair for fine sweeping 1 pc. K.Lean Ergo hand sweeper - Arenga for coarse sweeping 1 pc. cleaning cloth roll, blue, 2-ply, 1,000 tears, 360 m,   1 pc. plastic waste bin "Eco-Top" 40L with folding lid Dimensions: H x W x D  - Weight: (without packaging) without cleaning equipment: 1.800 x 600 x  470 mm - 35 kg with cleaning equipment:  1,980 x 1,010 x 570 mm - 47 kg Assembly instructions The K.Lean Station 460-4, 460-5 and 460-6 are screwed on a one-way pallet 800x620 and delivered stretched with opal foil. For reasons of possible transport damage, the wheels are supplied loose with screws. The holders for the Hallenser edge shovel and hall broom must be screwed over from the transport safe position according to the assembly instructions.

The K.Lean tool holders are variably attached to the patented universal clamping rail. The clamping rail is extruded from aluminium profiles and anodised. Together with the separately available tool holders, it offers a unique, linear and flexible organization system. In free-floating use, the clamping rail unfolds its full potential: The system offers access to the tools, transparent workstations and additional depth (which benefits the offset mounting of tool shadows or special holders). The rail's closed top profile prevents coarse soiling. Sliding nut slides are located at the back and at the bottom, which can be used toattach various accessories(special holders, tool shadows). The universal clamping rail is part of the workbench attachments and the mounting trolley. It is available individually and by the metre for individual designs and applications. The clamping rail can be easily attached to walls and other flat surfaces in addition to the floating installation.

Phillips screw for fastening the universal terminal strip at the front. Sold in packs of 100.